The gripping pull-back action of our Pullback Collet Chuck (5C) to actuate the collet chuck. Means the workpiece will be moved slightly in the Z-Axis. This is normally acceptable for first operation work and the work piece position can easily be determined with a facing cut. The 5C and 16C collets have been designed with a long small nose diameter allowing for good clearance for tooling. All collet closers are case hardened and ground optimising the rigidity, strength and durability.
PreliminaryKomatsu Straight Side Transfer Press with Rolling BolsterModel: E4T1700-05-120-MFYear: 19911700 Metric Ton (1873 Short Ton)750 mm Slide Stroke (29.5")150 mm Slide Adjustment (5.9")1350 mm Die Height (SDAU from Bolster) (53.2")6000 mm x 230...
Based on the Fixed Table Vertical with a traveling column, the FTV-5AX incorporates a 5 axis spindle head for full 5 axis machining.
Available with two X axis options 4000mm and 6000mm and a large 1200mm Y axis, the FTV-5AX gives you multi-axis v...
MAJEVICA
08354
TABLE SIZE 1200x450 mm
MAX GRINDING LENGTH 1130 mm
MAX GRINDING WIDTH 600 mm
LONGITUDINAL TRAVEL 1130 mm
CROSS TRAVEL 500 mm
VERTICAL TRAVEL 600 mm
MAGNETIC CHUCK 1000x300 mm
WHEEL SIZE 400x50x127 mm
WHEEL SPEED 1440 rpm
MOTOR POWER 5,...
Centre Height 195 mmSwing over bed 400 mmSwing over cross slide 246 mmSwing in gap 585 mmDistance between centres 1250 mmSpindle Bore 54 mmSpeed Range 25-2000 rpmC/w 3- 4jaw Chucks, Quick Change tool-post, Fixed Steady and DRO...
