System Specifications
Press Brake
Maximum Tonnage: 143 U.S. tons
Bend Length: 127 inches
Maximum Stroke Length: 7.87 inches
Open Height: 19.7 inches
Throat Depth: 16.3 inches
Distance Between Housings: 106.3 inches
Ram Repeatability: +/- 0.00004 inches
Approach Speed: 7.87 inches per second
Bending Speed: 0.78 inches per second (Max) programmable
Return Speed: 7.87 inches per second
Overall Machine Dimensions: 139" (L) x 116.9" (H) x 60" (W)
(174" (L) w/control to far left)
(88.6" (W) w/control in forward position)
Hydraulic Oil Capacity: 17.8 gallons
Machine Weight: 26,400 lb. Approx.
Backgauge
Repeatability
L Axis +/- 0.00008 inches
Movement Range
L Axis 27.55 inches
Y Axis 106.3 inches
R Axis 9.8 inches
Feed Speed
L Axis 1,180 inches per minute
Y Axis 2,362 inches per minute
X Axis 393 inches per minute
Minimum Command Unit
Ram 0.0001 inch
Backgauge 0.001 inch
CNC Controller, Model: Amada AMNC-PC
Axes of Control: Eight
D1 & D2 - Ram depth
(+/- 0.098" ram tilt)
L1 & L2 - Backgauge
(19.68" gauge taper maximum)
Z Vertical finger position
Y1 & Y2 - Horiz. finger movement, side to side
CC - Ram crowning
Click on link for videos under power:
https://youtu.be/81ZclRUryVA
https://youtu.be/Mjnng1YQBdc
https://youtu.be/Mg8V5uPBbnk
https://youtu.be/HSQFva5YTU4
https://youtu.be/3z2Ug08xDeg
CR
08979
Nominal force 400 Ton
Table size mm 2750x1400
Rounds per minute 10-25
Slide stroke 500 mm
Slide adjustment 360 mm
Max gap at p.m.i. 960 mm
Max blank holder stroke mm 225
Approx. machine weight 86.000 kg
USED MACHINE
Elgo P40 twin axis control – X & Y, Infra red lightguards, Side & rear fences, Quick release ‘Euro Style’ top tool clamps, Top & bottom tooling, Wandering footpedal, Front support arms