The fundamental principle of the magnetic bending machine is that it uses an electromagnetic clamp rather than a mechanical clamping system.
The machine consists of a long electromagnet with a steel clamp bar located above it. Sheet metal is clamped between the two by an electromagnet capable of clamping with a force range of between 3-6 tons. Rotating the bending beam then forms the bend as the sheet is bent around the front edge of the clamping bar.
There are 4 different types of clamping bar used to form different folds.
MAUT
10204
CNC Heidenhain ITNC 530
X axis 12.000 mm
Y axis 4.700 mm
Z axis 1.500 mm
Rapid speed 40.000 mm/min
5 axis milling head
ISO 50
6.000 RPM
A/C axis positioning 36.000 positions (0.01° resolution)
A rotation +/- 180° (360° total)
5.000 °/m...
MITSUBISHI
06920
CNC Mitsubishi
X stroke 320 mm
Y stroke 250 mm
Z stroke 220 mm
Thread diameter from 0.10 mm to 0.30 mm
V axis stroke +/- 32 mm
U axis stroke +/- 32 mm
Max table load 500 kg
USED MACHINE
YEAR 2008
NC control for cut length & number of pieces | Colour touch screen control panel | Kerf separation for use with TCT sawblades | Hydraulic centerless swarf conveyor | Detachable hydraulic bundle vices (2 x pieces) | Variable blade speed inverter & dig...
