advanced filter

Mitre Saws

Model:

OK-VISE Jaws

Description:

Replacement Jaws for Clamps

More Info
Mitre Saws

Model:

Master Base Jaws

Description:

Set of three replacement base jaws. Base jaws are normally replaced in the event of a crash. Please check the condition of slide ways in the chuck before replacing. Replacement of base jaws will not necessarily increase accuracy. Any damage or wear t...

More Info
Vertical Bandsaws

Model:

Sleeves to suit Klamp BS Mandrel

Description:

Standard Sleeves for use with KEM-BS-xx Mandrels. 1/2 length sleeves & extended length sleeves available

More Info
Horizontal Bandsaws

Model:

Blank Draw Nuts

Description:

Used for mounting a BT series chuck onto a drawtube, this connector is supplied blank to be machined out to the required thread. **Some machine setups may require the use of extended connectors as well as a drawnut**

More Info
Horizontal Bandsaws

Model:

Blank Draw Nut

Description:

Used for mounting a B200 chuck onto a drawtube, this connector is supplied blank to be machined out to the required thread. **Some machine setups may require the use of extended connectors as well as a drawnut**

More Info
Circular Saws

Model:

Circlips

Description:

Spare circlips to din standard collets. Sold as a pair.

More Info
Gantry Saws

Model:

Replacement Hard Jaws

Description:

Replacement Jaws to the CP33 Clamping Parts

More Info
Mitre Saws

Model:

Free Jaw Vise

Description:

Vise mounted directly to the machine bed. The actuation not only clamps the components but also pulls it down. The jaws are available in smooth or serrated. Parts CP15 and CP16 work as stop for this vise.

More Info
Sawing

Model:

Swing Clamp CP10

Description:

Swing Clamp CP10 are useful for supplying a good amount of holding force from a clamp using a small amount of surface area. Like most of Leave's components it can be used well with the rest of the fixturing components and base plates. Swing ...

More Info
Sawing

Model:

Swing Clamp CP08

Description:

CP08 Swing clamps are useful for supplying a good amount of holding force. From a clamp using a small amount of surface area. Like most of Leave's components it can be used well with the rest of the fixturing components and base plates. Swing clamps ...

More Info
Horizontal Bandsaws

Manufacturer:

Standard

Model:

BoltFast Standard Soft Jaw Set

Description:

Plain soft jaws for OneLok that fits 5OL1540 and 5OL1550 and well as the previous generation of OneLok. These jaws are easily machined to suit complex shaped workpieces and can be removed and re-used without re-skimming. Excellent for prototyping as ...

More Info
Horizontal Bandsaws

Manufacturer:

STARTRITE

Model:

startrite 20v uk3 10 speed vertical bandsaw 1750vat ex university hospital

Description:

STARTRITE 20V / UK3 10 Speed Vertical Bandsaw.Ex- University Hospital Throat 20″. Daylight 12″. Table Size 20 1/2″ x 20 1/2″. Blade Speeds 50 – 3000 fpm. Blade Width 5/8″. Tilting Table. Motor Size 1.5 KW.

More Info
Horizontal Bandsaws

Manufacturer:

Baileigh

Model:

baileigh bs 250m band saw 415v with roller support

Description:

Specifications Capacity:- round 90/45/60 degree 227mm/150mm/90mm Square 220mm/144mm84m...

More Info
Horizontal Bandsaws

Manufacturer:

Horizon

Model:

buildwell 9 x 16 automatic horizontal bandsaw ex norwich norfolk hospital

Description:

Buildwell 9″ X 16″ automatic Horizontal Bandsaw ( Ex- Norwich & Norfolk Hospital). Support available

More Info
Horizontal Bandsaws

Manufacturer:

Pedrazzoli

Model:

pedrazzoli mec brown 75 pull down cut off saw 1200vat

Description:

PEDRAZZOLI MEC BROWN 75 PULL DOWN CUT OFF SAW 315mm blade, double mitre to 45 degrees, 2 speeds, extra vice support, work support, fully guarded, coolant.

More Info
Horizontal Bandsaws

Manufacturer:

STARTRITE

Model:

startrite meba sm200 horizontal bandsaw ex british airways 1200vat

Description:

Startrite Meba SM200 Horizontal Bandsaw. Ex- British Airways C/w with Quick release vice & coolant.

More Info
Horizontal Bandsaws

Manufacturer:

STARTRITE

Model:

startrite 24 t 10 vertical bandsaw ex british airways

Description:

Startrite 24-T-10 Vertical bandsaw. Ex-British Airways Throat depth 610mm height under guide 200mm table 483 x 483mm Speeds 26-1460m/min Blade length 3200mm Motor 0.95kw Weight 255kg

More Info
Horizontal Bandsaws

Manufacturer:

Imet

Model:

imet perfect 300 pull down cold saw

Description:

Cutting capacity at 90° Round: 102mm Square: 90mm Rectangular: 120x80mm Cutting capacity at 45° left Round: 90mm Square: 80mm Rectangular : 90x70mm Cutting capacity at 45° right Round: 90mm Square: 80mm Rectangular: 85x70mm Blade dimensions 300mm ...

More Info
Horizontal Bandsaws

Manufacturer:

STARTRITE

Model:

startrite 316 horizontal

Description:

Machine Specifications: Horizontal / Vertical / Manual / Semi Au Vertical Cutting Diameter (mm) 30″ throat Dimensions Of Saw-Band (mm) 16mm Cutting Speed (M/S) 90-3600 Main Drive Power (KW/V/Hz) 415v Feed Hydraulic Welder Yes

More Info
Horizontal Bandsaws

Manufacturer:

STARTRITE

Model:

startrite 326 vertical bandsaw

Description:

Startrite 316 Vertical Band Saw …………£1,495+vat In good working order. Infinitely variable band speeds in two ranges 50-3,600 F.P.M. Built-in blade welder • 3 H.P. 380-415v • Approximate Weight: 1,680 Lbs. • Approximate Dimensions: 80�...

More Info

SEND ENQUIRY

*I AM A

Dealer

End User

HAKANSSON (8)	KLAEGER (4)	EISELE (4)	Jaespa (3)
Thoomas (1)	MACC (19)	Metallkraft (1)	Kasto (20)
FORTE (6)	BERA (1)	Other (159)	Stenner (1)
METLSAW (1)	MISSLER (2)	KOLLE (1)	Amada (18)
BUEHLER (1)	ABRASIVE (25)	Meyer and Burger (1)	ARNZ (1)
Wadkin (1)	Axminster (1)	GIDDINGS & LEWIS (8)	Chester (62)
LVD (38)	Darley (5)	Haco (23)	Kaltenbach (18)
Universal (15)	HINES (28)	Everising (16)	Wespa (1)
Baykal (2)	Comaca (2)	Peddinghaus (11)	ERMAK (2)
King (1)	Durma (1)	Friggi (3)	Safan (5)
Bosch (2)	Schmaltz (1)	Eagle (1)	Wohlenberg (1)
Pedrazzoli (7)	Schneider (2)	Unipunch (1)	DANOBAT (2)
Heavy (2)	HAND (2)	Pehaka (2)	VARI (1)
PROFIL (1)	Stanko (1)	Metora (2)	Doall (3)
Hamm (2)	Optimum (6)	Rapid (1)	COLLY (1)
Gasparini (1)	Krupp (1)	BIANCO (12)	MEP (12)
Imet (34)	Mega (1)	FERRARI (1)	PHOENIX (2)
Carif (8)	Europa (3)	MACH (8)	Titan (1)
MINI (2)	HERCULES (1)	Bewo (6)	Huvema (7)
STARTRITE (15)	FISCHER (2)	Imec (1)	MOSSNER (3)
Bernardo (2)	BMSY (1)	MAXI (1)	Kiheung (1)
ALPHA (6)	Thiel Segura (2)	FMB (1)	Horizon (31)
vertical (3)	Horizontal (1)	Addison (7)	Kesmak (5)
Standard (1)	Baileigh (1)	Qualters and smith (1)	Nipon (1)
Agazzani (1)	Marvel (2)	Heller (1)	Wagner (1)
Ohler (1)	Elumatec (1)	Cast (1)	REICH (1)
TRYTON (2)	Hang (2)	MAS (1)	Chieftain (3)
Bristol (2)	Challenger (2)	Colchester (1)	Bridgeport (1)
Fanuc (1)	Bystronic (1)	Mitsubishi (2)	TRUMPF (4)

Switzerland (26)	Germany (21)	United Kingdom (16)	United States of America (20)
Italy (13)	Other (9)	Other (650)	USA (19)
Belgium (4)

Search By Manufacture

Search By Country