TRENS
07874
Distance between centre mm 1500
Execution CE: with front chip guard, rear guard, lead screw and draw bar guard
BASIC EXECUTION
Metric execution
Spindle bore Ø 52 mm
Four way tool post
Electrics for 3 x 400 V / 50 Hz, circuit brakers
Right hand handwheel (not available for SN50CL 3,)
Maximal swing in gap 700 mm in distance 230 mm from front of spindle nose (not availabe for SN50CL 3,)
Rapid traverse
Tailstock
Main motor output 5.5 kW
Chip pan and coolant device
LED lighting
Steel hose cable carrier
Folding handle for X axis
Folding handle for Z axis
Chuck guard Ø 250 mm with safety switch
Colour – RAL 7035 / 7016 / 6153
Set of exchange gears for cutting of threads
3 pcs of shear pin
Operator kit
Operator manual on CD, documentation
Dead center Morse 5
Reduction sleeve from Morse 6 to Morse 5
SPECIAL EXECUTION AND OPTION TO INCLUDE:
Camlock spindle nose D6 (DIN 55029 & ISO 702-II), reduction spindle sleeve to from Jarno No.18 to Morse 4
3-jaws selfcentring chuck TOS with flange Ø 250 mm Camlock D6 (DIN 55029 & ISO 702-II)
Faceplate with four independent jaws Bison 4344-315-6 Ø 315 mm Camlock D6 (DIN 55029 & ISO 702-II)
Steady rest 10-115 mm with friction inserts
rolling insert for steady rest (set for steady rest is 3pcs )
Follow rest 10-115 mm with friction inserts
rolling insert for follow rest (set for follow rest is 2pcs)
FPT
09165
HYDROSTATIC
CNC HEIDENHAIN TNC 426CB
X axis travel 4000 mm
Y axis travel 2000 mm
Z axis travel 1200 mm
Max head revolutions 3000 , ISO 50 DIN 69871
Head indexed 2.5 degrees, reconditioned
Chain tool change 40 positions SIDEPLASMA
Internal c...
COMEV
07691
CNC D.ELECTRON
-HEIGHT OF CENTRE OVER BED MM 260
-DISTANCE BETWEEN CENTRE MM 2000
-SWING OVER BED MM 520
-SWING OVER SLIDE MM 265
-TURNING LENGHT MM 1750
-TURNING DIAMETRE MM 275
-SPINDLE TAPER CL 8''
-SPINDLE BORE MM 110
-CONE MORSE CM 5...
ARNO
New05459
X-AXIS STROKE MM.1100
Y-AXIS STROKE MM.240
Z-AXIS STROKE MM.360
TABLE MM.1550x350
T-SLOT N. 4 32x18 MM
SPINDLE REVOLUTIONS 40-1700 N. 12 SPEEDS
QUILLING DIAMETER MM 130
DISTANCE BETWEEN SPINDLE AND TABLE MM 320
HEAD TILT RIGHT/LEFT +/-9...