0:
Type: SVRM 4R - Linear 4 rolls individually hydraulicaly driven = no slip, specifically for conical rolling 4 hardened rolls 6 digital readouts conical bending, smallest diameter of cone is 1100 mm with the toproll you can process both thin and thick plates (hydraulic crowning of top roll) max speed: 7,5 m/min (variable hydraulic speed) High accuracy machine because it uses linear guides for the side rolls,
which means that the side rolls cannot deflect in any way! (new machines are no
longer manufactured with linear guides due to high costs, instead planetary
guides are used which are inferior) Machine is equipped with backload feature > a tilting cylinder which is
connected to the top roll; this allows the operator to apply upwards or
downwards backload to the toproll to counter act deflection of the top roll = crowning of the top roll >
incredibly rare feature! Machine is equipped with a shock absorber system which is useful to calibrate a
rolled workpiece after welding. With this shock absorber system the machine is
able to handle the seam resulting after welding. When rolling the part and the seam passes between
the top and bottom roll the shock is not transferred to the bearings and the
machine is not overloaded. Another unique feature about this bending roll is it's increased capacity for pre-bending, here you need to multiply the platethickness by 1,8. For example a plate with a thickness of 40 mm x 1,8 = 72 mm. Standard you would have to multiply by 3, for a plate of 40 mm this would equal to 120 mm. During the rolling process all other hydraulic movements can be executed at the same time. 2 hydraulic plate support systems (left and right) for rolling large diameter workpieces hydraulic vertical topsupport to support sheet during rolling, max diameter of workpiece with this support is 6300 mm 1:
Type/Model: SVRM 4050 x 40/50/60 mm 2:
Stocknumber: O.06 14113 3:
Main category: [O] Press brakes, Bending machines, Straightening machines, Punching machines, Laser cutting machines & Flamecutting machines and Roll forminglines 4:
Sub category: [O.06] Bending rolls 5:
Brand: Schafer
{"0":"This line was used to prepare\/press the inner linings of fluorescent lighting fixtures. 1 - Dimeco double head decoiler 2372\/DM (driven) - width: 550 mm - 2x 2000 kg 2 - Dimeco 1675\/D straightener with CNC feed system (cybelec) - width: 500 ...
