General Specifications for LNS Type HYS 6.32 HS-4.8 barfeed
Consisting of: A three-piece aluminum profile barrel assembly containing 6 steel guide
tubes aranged in a concentric circle with manual indexing ring at the rear,
and an automatics centering system at the front of the tube, with an
electro-
mechanical end of bar signal.
Six (6) guide tubes with internal diameters of:
1.339" for 1-3/32" to 1-1/4" diameter barstock
1.181" for 1" to 1-3/32" diameter barstock
1.063" for 3/4" to 1" diameter barstock
.827" for 1/2" to 3/4" diameter barstock
.551" for 1/4" to 1/2" diameter barstock
.315" for 1/16" to 1/4" diameter barstock
Originally configured for Tornos Deco
Barfeed: 204" x 41" x 50" 2,500 lbs
Hydraulic Tank (can fit under barfeed): 37" x 20" x 27" 150 lbs.
Used for mounting a BB200 chuck onto a drawtube, this connector is supplied blank to be machined out to the required thread. **Some machine setups may require the use of extended connectors as well as a drawnut**
280mm Round Cutting Capacity 230mm Square Cutting Capacity 420mm Feeding Stroke Blade Speeds to 90m/min Motor 3HP Floor Space 62” x 90.5” x 50” Manufactured in 2011 Whilst every effort has been made to ensure that the above information is accu...
