Home > Miscellaneous > Other Machines Go Back
REQUEST PRICE VIEW MAP

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Horizon
  • Model:
  • Amada HA250W automatic horizontal bandsaw
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Amada HA250W automatic horizontal bandsaw The Amada HA250W automatic horizontal bandsaw is a reliable workhorse industrial bandsaw machine designed around the capability of the saw blade, therefore guaranteeing optimum cutting performance. Utilising a 34mm wide blade the Amada HA250W automatic horizontal bandsaw has sufficient beam strength to enable it to cut any metal quickly and efficiently, up to its maximum capacity of 250mm, thus delivering an excellent cost-per-cut ratio. This simple robust bandsaw machine has often been imitated, however never surpassed. Pressure/flow feed control The independent pressure and flow controls in series ensure that optimum cutting can be achieved regardless of the section or alloy being cut. Drive wheel transmission This is designed and built by Amada to provide high efficiency reduction, therefore delivering more power to the large diameter shaft. This ensures that developed torque is transferred to the blade. Maximum cutting capacity Round bar: 250 mm round bar Rectangular bar: 300mm wide x 250mm high Automatic, powered chip conveyor Multiple index up to 9 times Split front vice Clamps the cut piece in front of the blade to reduce break-off tags. Simple operation Amada performance bandsaw blades Saw service and spares For larger capacity, see the Amada HA400W Compact and robust completely automatic band saw machines in stable swivel joint design for economic cutting of solid, shaped and hollow materials in all material qualities including Inconel, Hastelloy and titanium – individually or in a bundle. In automatic operation, the cut-off length and piece count can be preselected. The combined feed pressure system has the benefit of selecting the feed pressure according to the sawing task. For example, constant pressure for difficult to cut solid material, load-dependent feed for tubes and profiles. Short cycle times due to patented material scanner with automatic changeover from rapid feed to feed. An integrated chip conveyor is included in the basic equipment. The HFA models also have an automatic zero stop for material start detection. The NC controller provides the requirement for automatic sawing using selectable cut-off lengths from 0 to 470 mm, with multiple infeed up to 9999 mm. For a full specification, demonstration or quotation call now on 01274 870311.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

fdbdgbdgb fxnjmynhtbgvfcd

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Maximart
      Model:
      Maximart - VMC 1250 (F567)
      Description:
      {"Brand": "Maximart", "Machine no": "F567", "Type": "VMC 1250", "Year of make": "1999", "Vertical": "", "Table length": "1.400 mm", "Table width": "570 mm", "X": "1.250 mm", "Y": "1.000 mm", "Z": "700 mm", "Spindle taper": "BT40", "Tool changer": "24...

      More Info

    • Manufacturer:
      Chester
      Model:
      CHESTER SA-650DC Bandsaw
      Description:
      Precision saw with two conjoined linear columns for stability and accurate cutting. With powered rollers for moving the workpiece.

      More Info

    • Manufacturer:
      Model:
      Parts Ejector
      Description:
      Parts ejectors for collet chucks are captured between the sleeve and the drawnut. If this is for a new application please contact our technical team before purchase.

      More Info

    • Manufacturer:
      Model:
      U-Clamp
      Description:
      An open shaped toolmakers clamp allows for a quick easy installation. Hardened and Chemi-Blacked for durability and with a chamfer for additional access to the part. Recommended Parts SU01 Jig Rest Button PT07 Clamping Stud PT04 Flange Nu...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User