RAMBAUDI
09523
Table dimensions 1300x300 mm
Longitudinal stroke 950 mm
Cross stroke 300 mm
Vertical stroke 445 mm
Ram stroke mm 550
Horizontal spindle - Taper ISO 50 - Speed min/max rpm 25:1500
Vertical spindle - Taper ISO 40
Spindle speed rpm 145:3500
Spindle motor power kW 5.5
Quill stroke mm 150
Quill diameter mm 105
USED MACHINE
ROSA
07234
Tangential wheel and rectangular table
Longitudinal travel 700 mm
Cross travel 300 mm
Distance between table and spindle mm 300
Grinding diameter mm 300
Grinding width mm 40
Equipped with:
Magnetic plate 600x300 mm
USED MACHINE
Standard metric clamping studs. These studs are manufactured from S45C(JIS) / CK45(DIN) heat treated to HRC 30-35 and have a black oxide surface finish.
NC24-L with 1000mm feeder NC24-LB with 2500mm feeder | NC24-LS versions with servo feed of the sawblade | Large capacity with linear blade feed system | Hydraulic feed of the saw blade carriage | Piece separation system to eliminate back cutting mark...
Swing Clamp CP10 are useful for supplying a good amount of holding force
from a clamp using a small amount of surface area.
Like most of Leave's components it can be used well with the rest of the fixturing components and base plates.
Swing ...
.jpeg)
