"Capacity: Maximum workpiece dia.350mm. Maximum workpiece height 315mm. X axis stroke (saddle right\/left movement) 350mm. Y axis stroke (column back\/forth movement) 550mm. Z axis stroke (spindle up\/down movement)510mm. A Axis travel (table tilt) 0.0001\u00b0 x 1500000. C axis travel (table rotation) 0.0001\u00b0 x 3600000. Maximum table load (evenly distributed) 60 kg. Spindle: Spindle taper 7\/24 taper No.40. Spindle speeds 35-12,000 rpm. Main motor (AC inverter motor) 40% ED rating 22 kW. Main motor (AC inverter motor) continuous rating 15 kW. Main motor maximum torque 143Nm. Feed Rates: Rapids X\/Y\/Z 60\/60\/56 m\/min. A\/C 18000 degrees\/min. Cutting feed rate X\/Y\/Z 56000mm\/min. No. of simultaneous controlled axes 5.\n\nAWC (Automatic Workpiece Changer): No. of workpiece holders 32. Clamp interface HSK-A100. Maximum workpiece dia. 350mm. Maximum workpiece height 315mm. Workpiece holder mass 60 kg. Loader feedrate A axis (with workpiece) 9.5m\/min (without workpiece 25m\/min. Loader feedrate B axis 80m\/min. Loader feedrate C axis 30m\/min. Loader stroke A axis 299 \u00b0. Loader stroke A axis 950mm. No. of loading stations 1. No. of workpiece stocker stations including standby stations 34.\n\nATC & Tool Magazine: Tool storage capacity 145. Tool selection method Fixed address, auto shorter path selection. Tool shank type BT40. Retention bolt type Yamazaki ANSI type. Maximum tool dia 90mm (with adjacent tool) . Maximum tool dia. 130mm (without adjacent tool). Maximum tool length (from reference face of taper) 350mm.Maximum weight of tool 8 kg. Maximum tool moment 6.5 Nm.\n\nCoolant tank capacity 400 Litres.\n\nMachine Dimensions L x W x H 4930mm x 3430mm x 2968mm. Approximate weight 15,600 kg"
