Home > Spares & Accessories > Machine Vices Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Pietro Carnaghi
  • Model:
  • MILLING GANTRY/PORTAL PIETRO CARNAGHI MOD. UNIMILL 35 CA
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

PIETRO CARNAGHI 09396 CNC SIEMENS TECHNICAL DETAILS: Distance between frames mm 3500 Maximum height between table top and spindle nose mm 1850 Working table dimensions mm 3000x16000 Working table capacity kN/m2 50 PORTAL: Portal stroke (X axis) mm 16000 Portal feed speed (X axis) mm/min 0.5-10000 Portal rapid speed (X axis) mm/min 20000 MILLING HEAD: Head section mm 480x480 Cross travel of the carriage on the crossrail - Y axis mm 4000 Vertical travel of the head - Z axis mm 1600 Spindle rotation speed in 2 ranges -1 range rpm 6-185-750 -2 range rpm 25-750-3000 Spindle motor power (S1) kW 37 Max spindle torque at 185 rpm (1st range) Nm 1900 Y and Z axis feed speed: -1 mm/min infinitely variable range 0.5-10000 Z axis rapid speed mm/min 20000 Y-axis rapid speed mm/min 40000 COMPLETE WITH: -Automatic tool clamping -Automatic clamping of accessories -3 positions tool holder disk magazine -120 positions tool holder chain magazine -TV-35 VERTICAL MILLING AND DRILLING HEAD: Type DD210 Distance between spindle and head plate mm 175 Spindle taper DIN 2079-50-AT4-CC Spindle nose DIN 2979-B50 DIN 69871-B50 shank DIN 69872-B28 tie rod Automatic head clamping on machine Head clamping force on machine daN 10000 Automatic tool clamping Tool clamping force in the head daN 1900 Spindle speed 8-3000 rpm Max power at 175 rpm kW 35 Max torque at 175 rpm Nm 1900 Input/output transmission ratio 1:1 Front flange coolant through spindle Spindle air blowing system Max bearing temperature 60 degrees -TS-35 HORIZONTAL MILLING AND DRILLING HEAD: Type DD230 Distance between spindle and head plate mm 200 Spindle taper ISO 50 Spindle nose according to DIN 2079-50 AT4 CC Automatic tool clamping DIN 6987-B50 shank DIN 69872-B28 tie rod Spindle speed 6-3000 rpm Automatic head clamping on machine Max power at 175 rpm kW 35 Max torque at 175 rpm Nm 1900 Input/output transmission ratio 1:1 C2 axis positioning 144x2.5° C2 axis rotation speed rpm 3 Front flange coolant through the spindle Spindle air blowing system Max bearing temperature °C 60 -TVL S 400 VERTICAL MILLING AND DRILLING HEAD: Type DD280SS Distance between spindle and head plate mm 175 Spindle taper DIN 2079-50-AT4-CC Spindle nose DIN 2979-B50 DIN 69871-B50 shank DIN 69872-B28 tie rod Automatic head clamping on machine Head clamping force on machine daN 10000 Automatic tool clamping Tool clamping force in the head daN 1900 Spindle speed 8-3000 rpm Max power at 175 rpm kW 35 Max torque at 175 rpm Nm 1900 Input/output transmission ratio 1:1 Front flange coolant through spindle Spindle air blowing system Max bearing temperature °C 60 USED MACHINE
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      DRILLING INVEMA MOD. FR40-1300
      Description:
      INVEMA 08204 Drilling capacity on steel mm 40 Drilling capacity on cast iron mm 50 Max arm mm 1300 Horizontal head stroke mm 1015 Vertical arm stroke mm 600 Column diameter mm 280 Spindle quill diameter mm 68 Quill stroke mm 280 Taper CM 4 Spindle sp...

      More Info

    • Manufacturer:
      WMW
      Model:
      RADIAL DRILLING WMW 40X1200
      Description:
      WMW New05100 RADIUS MM.1200 DRILLING CAPACITY MM.40 QUILL STROKE MM.350 EQUIPED WITH CUBE USED MACHINE

      More Info

    • Manufacturer:
      Okuma
      Model:
      LATHE OKUMA MOD. SPACE TURN
      Description:
      OKUMA 07460 LB 3000 EX (MY) Cx950 AXIS Y LIVE TOOLS CNC OKUMA OSP-P200L CAPACITY: Max swing diameter over bed mm 580 Max swing diameter over carriage mm 470 Distance between centers mm 970 Max turning diameter mm 340 Max piece lenght mm 950 STROKES: ...

      More Info

    • Manufacturer:
      Heckert
      Model:
      CENTRE HECKERT MOD. CWK 400
      Description:
      HECKERT New04760 HORIZONTAL CNC SIEMENS SINUMERIK 840C -AXIS X MM.650 -AXIS Y MM.500 -AXIS Z MM.650 -HEIGHT FLOOR TO WORKING SURFACE MM.1000 -TOOL MAGAZINE N. 60 -MAX TOOL DIAMETER MM.80 -MAX TOOL DIAM FREE MAGAZINE MM.125 -MAX TOOL LENGHT MM.350 -MA...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User