TOVAGLIERI
07446
WITH 2 HEAD.
-Max workpiece length allowed for two simultaneous facing and centerings and with workpiece clamped with two vices mm 5000
-Min workpiece length allowed for two simultaneous facing and centering and with workpiece clamped with two vices 170 mm
-Min workpiece length allowed for only two simultaneous centerings and with workpiece clamped with two vices 150 mm
-Max workpiece length allowed for two simultaneous facing and centering and with workpiece clamped with a vice mm 150
-Min workpiece length allowed for two jointings and simultaneous centering and with workpiece clamped with a vice 90 mm
-Min workpiece length allowed for the only two simultaneous centerings and with workpiece clamped with a vice 50 mm
-Max and min. diameter allowed in the vices mm 250-20
-Max hole diameter from center 18 mm
-Min. drilling diameter (for the centering centre) mm 3
-Max allowed stroke of centering spindle mm 60
-Max turning length of centering collar mm 50
-Max and min. turning diameter of centering collar mm 120-20
-Max over-metal on every end of the piece mm 5
-Max diameter of the workpiece allowed between two vices 500 mm
-Rev/min of milling spindles no.122-194-305-490
-Rev/min of centering spindles no.220-315-440-620-870-1220
-Milling spindle with taper ISO 50 DIN 2079
-Centering and blade spindle with ISO 40 DIN 2079 taper
-Total motors power around HP 25,5
USED MACHINE
THOMAS
09755
MANUAL BELT
Cut from 0 to 60 degrees to the right
Cutting capacity:
-Round 0 degrees 225 mm / 45 degrees 140 mm / 60 degrees 60 mm
-Square 0 degrees 200 mm / 45 degrees 140 mm / 60 degrees 60 mm
-Rectangle 0 degrees 240x140 mm / 45 degre...
SIBIMEX
09716
Height of center mm 500
Turning diameter on the bed mm 1090
Turning diameter on the cross carriage mm 690
Turning diameter on the gap mm 1250
Bed width mm 700
Distance between centers mm 5000
SPINDLE:
Spindle nose DIN 55027 N.15
Spindle...