(Image shows typical Challenger Lathe Model Type) Centre Height 178mm Swing over Bed 356mm Distance Between Centres 1000mm Swing over Carriage none Swing over Cross Slide 220mm Swing in Gap 506mm Gap Length in Front of Face Plate 38mm Cross Slide Travel 180mm Top Slide Travel 95mm Bed Width 206mm Spindle Nose D1-4 Spindle Bore MT5 Taper Reduction in Sleeve MT5 to MT3 Number of Spindle Speed Ranges 2 Range of Spindle Speeds 30-550rpm,500-2700rpm Quill Diameter 45mm Quill Travel 120mm Quill Internal Taper MT3 Longitudinal Feeds 42,0.043-0.653mm Cross Feeds 0.015-0.220mm Metric Threads 22,0.4-7mm Imperial Threads 44,4-56t.p.i Pitch of Leadscrew 8t.p.i/4mm Main Motor 1.5/2.4kw(2.01/3.21hp) Coolant Pump Motor 0.04kw(0.053hp) Floor Space 1820X740X1250mm Net Weight 750kg
HERBERT 9C – 30 Combination Long Bed Turret Lathe Swing over bed 30" (762mm) Swing over cross slide 21" (533mm) Spindle bore 4 ¼" (108mm) Spindle speeds 22 – 600rpm Max. distance spindle flange to turret face 100" (2540mm) 4 way tool post 3 Poin...
Swing over bed: 390mm
Swing in gap: 610mm
Gap in front of face plate 150mm
Swing over cross slide: 240mm
Distance between centres: 1,250mm
Cross slide travel 230mm
Spindle speed: 18 - 2,500 rpm
Type of spindle nose: D 1-6
Main sp...