NAKAMURA TOME
10210
9 AXES CONTROLLED
2 TURRETS (12 stations each), SPINDLE AND COUNTER SPINDLE
Fanuc 18A numerical control
Distance between center 780 mm
Upper turret with ± 45 mm Y-axis and 180-degree B-axis indexing
Lower turret with motorized tools on C-axis
Motorized tool speed 6. 000 rpm
Turret1 motor 15 Kw and turret2 motor 11 Kw
Milling motor power 7.5 Kw
Center distance 780 mm
165 mm Kitagawa spindle in secondary head
Main spindle bar diameter 52 mm and secondary 45 mm
Head size A2-6.
Head speed 5,000 rpm
Rapid traverse speed 25 m/min on X and Z axes
Indexing time for turret change 0.2 seconds
Complete with:
- Iemca 1.5-meter loader
- Iemca bezel to be installed between lathe and loader
- Front scoop-type and rear gantry-type workpiece collector with 3 kg capacity
- MQ system for tool clamping
- Renishaw measuring arm
- Chip conveyor
- Automatic load control
- Dual foot pedals for opening and closing the main spindle and independent sub-spindle
- High-precision collet holder in the main head
USED MACHINE
SIGMA
07704
Table dimensions mm 1750x770
Max load Kg 2000
Axis X stroke mm 1600
Axis Y stroke mm 810
Axis Z stroke mm 630
Spindle speed rpm 40-15000
Spindle motor power kW 25/18
Tool change 40 positions
Tool holder SK 40
Approx. weight Kg 11500
Appro...
GIGANT
09022
Total press power 800 + 350 tons
Pistons: n.2 tons 800
Return power ton 100
Mobile table stroke or piston 1000 mm
Max pressure Bar 250
Pump l/mn 260
Moving table approaching speed mm/1'' 300
Moving table working speed mm/1'' 3-9
Mobile t...
MENSI
05805
4 HEADS:
-N.01 TAPPING HEAD
-N.03 DRILLING HEAD
5 STATIONS TABLE
EQUIPPED WITH:
-ROTARY TABLE FOR WORKPIECES LOAD AND DOWNLOAD
-CUTTING SYSTEM
USED MACHINE
MORARA
New02489
- Max table stroke mm 470
- Max grinding lenght mm 120
- Min grinding diam. mm 3 / 10
- Max grinding diam. mm 150
- Max swing mm 250
- Engine grinding wheel HP 3,0
- Engine oil pump HP 2 - 3
- engine head piece holder HP 1 - 0,5
- eng...