0:
Formerly used to manufacture flowerpots using composite materials. > step 1: wood granules are heated in dia under high pressure > step 2: flowerpots are pressed during heating cycle, cooled down afterwards and automatically unloaded Can be used for composite materials / plastics with heating & cooling. Equipped with auto turning tables for 4 die blocks Original cyclus: 1 - filling 2 - pre pressing 3 - high pressure pressing at 300° C 4 - after pressing & cooling consisting of flow hopper with 2 supply lines on Awema weighing system max retracting force 25 kN max lift: 400 mm built-in height: 1000 mm max pressure: 285 bar 380V - 175 A - 114 kVa with Rexroth hydrauliq aggregate and extraction hood 1:
Type/Model: for composite mat. 2:
Stocknumber: M.19 7238 3:
Main category: [M] Hydraulic presses 4:
Sub category: [M.19] Warm & cold flow forming presses 5:
Brand: Laufer URA 500 ton
PRELIMINARY SPECIFICATIONSNEW IN 1974MODEL 27-68375 TON CAPACITY12" STROKE12" DAYLIGHT OPENING120" X 42" BED AREA103" X 25" BETWEEN POSTSSPEEDS:500 IPM ADVANCE150 IPM WORK CONTACT30 IPM PRESSING 80 IPM BREAKAWAY400 IPM RETURNEQUIPPED WITH:DYNEX PF2...
