GLEASON 650 Hypoid Bevel Gear Generator with Equipment. Rougher/Finisher

MACHINE INFORMATION AND SPECIFICATION

    Manufacturer:

  • Gleason

    Model:

  • GLEASON 650 Hypoid Bevel Gear Generator with Equipment. Rougher/Finisher

    Condition:

  • 1

    YOM:

  • NA

    Control:

  • NA

    Price:

  • POA

    Country:

DESCRIPTION
Machine is suitable for the cutting of larger spiral bevel, hypoid, and zerol bevel pinions and mating gears up to 34” (863.6mm) diameter, 5” (127mm) face, with 1.08 DP (module 23.5) cutting capability. CAPACITY:Extreme ratio 10:1.Roof angle range 0º to 90º. Gear diameter – Maximum    34”  (863.6mm).Examples of maximum gear pitch diameters with 35º gear spiral angle using 19.7” (500mm) dia. cutter at the following ratios:  1 x 1  – 28.50”  (723.90mm). 2 x 1  – 34.00”  (863.60mm). 5 x 1 – 34.00”  (863.60mm). Maximum radial setting **15.00”**(381mm). Full depth – Maximum 1.5”  (38.1mm).Face width – Maximum 5.000”  (127mm).Coarsest Pitch (module) 1.08 DP  (23.5 module).Index Range*5 to 80 inclusive.WORK SPINDLE:Diameter of taper hole at large end 6”  (152.4mm).Taper per foot 0.75”  (19.0mm). Depth of taper  6”  (152.4mm).Diameter through spindle of hole 5” (1270mm). CUTTER DIAMETERS:Cutter diameters utilized 9”, 10.5”, 12”, 14”, 16”, 18” ((200,250,320,400 & 500mm).WORKHEAD SETTINGS :Offset above center – Maximum***4.5”  (114.3mm). Offset below center – Maximum***4.5”  (114.3mm). Machine center to nose of spindle – Maximum 23.5”  (596.9mm). SPEEDS & FEEDS:Cutter speeds  6 to 167 RPM (stepless). Cycle time, infinitely variable from 7 seconds/tooth minimum. ELECTRICAL EQUIPMENT:Motors (60 Hz/50 Hz ) Cutter drive motor, 15HP 1800 RPM /1500 RPM. Hydraulic motor, 7.5HP  1200 RPM/1500 RPM.Coolant motor, 2HP 1200 RPM /1500 RPM.D.C. generating drive motor, 6HP 1200 RPM * Most numbers up to 120 can also be accommodated but may require special change gears. ** This radial setting can be increased to 18.5” (462.50mm) for some applications *** Maximum offset applies to pinion and gears up to 25” O.D. for 34” diameter gears maximum offset is 1.0” Dimensions L x W x H (Floorspace) Inclusive of Hydraulic Unit, Electrical Cabinet & Swarf Conveyor. 235” x 123” x 92.5” (5970 mm x 3120 mm x 2350mm) Approximate weight of Machine 26,682 kgs. Accessories 5,000 kgs. Machine Serial No.748301
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    • Description:
      {"Brand": "Creusen", "Machine no": "BR414X", "Type": "nKB 832", "Year of make": "2016", "Capacity": "28 mm \u00f8", "Table length": "480 mm", "Table width": "420 mm", "Spindle taper": "MK 4", "Spindle Speed": "3480 omw/min", "Throat depth": "250 mm",...

      More Info

    • United States of America
      Description:

      More Info

    • Germany
      Manufacturer:
      Description:
      Year - 1984 Power - 100kN Working area - 10(to) Universal tensile tester, Software ZWICK Testexpert

      More Info

    • Manufacturer:
      Description:
      {"RotatingTable Size": "2 x 600mm x 300mm", "X Axis": "440mm", "Y Axis": "280mm", "Z Axis": "300mm", "Spindle Speed": "12000rpm, 24000rpm", "Spindle Motor": "10hp", "Tool Storage": "14, 21 Tools", "Spindle Type": "BBT 30", "Machine Weight": "3500kg",...

      More Info

    • Description:
      {"Shearing force": "20 - 55 kN", "Dimensions:": "", "Length": "540 mm", "Width": "175 mm", "Height": "125 mm", "Vice: width": "175 mm"}

      More Info

    • Description:
      {"Brand": "C-Tek", "Machine no": "F654", "Type": "KM-150D", "CNC Brand": "C-Tek", "CNC Type": "CNT Series", "Year of make": "2014", "Table length": "1.600 mm", "Table width": "450 mm", "X": "1.500 mm", "Y": "650 mm", "Z": "620 mm", "Spindle taper": "...

      More Info

    • Description:
      {"Brand": "Siduza", "Machine no": "L307", "Type": "MIG 400", "MIG": "", "Water cooling": "", "Amperage range minimum": "35 A", "Amperage range maximum": "500 A", "Welding capacity": "28,6 kVA"}

      More Info

    • Manufacturer:
      Description:

      More Info

    • Manufacturer:
      Description:
      {"Table length": "700 mm", "Table width": "250 mm", "Longitudinal travel (X-axis)": "320 mm", "Transversal travel (y axis)": "220 mm", "Vertical travel (z axis)": "410 mm", "Spindle speeds:": "", "stepless": "", "from": "56 t/min", "up to": "1000 mm/...

      More Info

    • Manufacturer:
      Description:
      {"Table length": "550 mm", "Table width": "320 mm", "Table load max.": "400 kg", "Longitudinal travel (X-axis)": "400 mm", "Transversal travel (y-axis)": "250 mm", "Vertical travel (z axis)": "400 mm", "Drill capacity in steel": "20 mm", "Taper in sp...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User