SANGIACOMO
10194
Nominal force 800 kN
Stroke of the nominal force 5 mm
Cycles per minute 65 cycles / min
Stroke adjustment range 14 : 150 mm
Stop time (with 65 cycles per minute) 154 ms
Slide adjustment 85 mm
Slide area 380 x 560 mm
Punch holder hole size 50 x 85 mm
Table area 580 x 900 mm
Opening in the table T 180 mm
Table height 850 mm
Area of the lower die plate. G x H 580 x 900 mm
Thickness of the lower die plate 65 mm
Maximum weight of the movable mold part 85 kg
Maximum mold area 510 x 820 mm
Opening in the lower die plate 180 mm
Mold height closed 265 mm
Distance between the table and the slide 330 mm
Opening in the uprights 410 mm
Depth of the recess 295 mm
Angle of inclination 0 °
Dim. hollows of the table and the lower die plate. S x T x U x V 18 x 32 x 14 x 32 mm
Mass 5600 kg
Motor power 5500 W
Total installed power 5550 W
Maximum mains air pressure 7 bar
Operating pressure 5 , 5 / 6 bar
Minimum pressure of balancing cylinders 4 bar
USED MACHINE
The Neostar permanent chuck is primarily designed for turning and grinding round and ring shaped workpieces.
The advantage is the possibility to machine of the front, inner and outer diameter of the workpiece in one operation.
Compact top plate...
RUSCH
06091
MOD. 275A
AUTOMATIC
Rectangular cutting capacity mm 275x275
Round cutting capacity mm 275
Square cutting capacity mm 275
Blade size mm 3660x27x0,9
Standard blade speed m/min 20-95
Workbench height mm 860
Motor power HP 2
Net weight Kg 115...
A great alternative for the Original Fixture Clamps when clamping rough material or more holding force is required. Low profile they offer good tool clearance and the cam actuation allows for easy, simple clamping. Made of just two components; a hard...