Bandsaw Machine HFA400W
The Amada HFA400W automatic bandsaw is a variation on the classic horizontal HA400 design incorporating improvements to blade and controls guaranteeing optimum cutting performance. Utilising a 41mm wide blade the Amada HFA400W has sufficient beam strength to enable it to cut any metal quickly and efficiently, up to its maximum capacity of 400mm, thus delivering an excellent cost-per-cut ratio.
NC Rear Vice
The rear vice is controled by an LED Programming unit situated on the control panel.
Number of cuts, tolerance, and auto trimming functions can all be set by the unit.
Up to 99 different programmes can be set.
Tolerance
The tolerance of the material to be cut can be set from +/- 0.1 to +/- 1mm
Auto trim cut
Material can be measured for the first cut from the front vice resulting in the trim cut being a cut component piece.
Pressure/flow feed control
The independent pressure and flow controls in series ensure that optimum cutting can be achieved regardless of the section or alloy being cut.
Drive wheel transmission
This is designed and built by Amada to provide high efficiency reduction, therefore delivering more power to the large diameter shaft. This ensures that developed torque is transferred to the blade.
Maximum cutting capacity
Round bar: 400 mm round bar
Rectangular bar: 400mm wide x 400mm high
Automatic, powered chip conveyor.
Cutting Capacity at 0° 350 mm Diameter 570 x 260 mm Rectangle 350 mm SquareCutting Capacity at +45° 350 mm Diameter 460 x 180 mm Rectangle 350 mm Square
Bandsaw H 1300 II
The Amada H1300II semi-automatic bandsaw has 1300mm capacity, and a single column and guide design with very heavy and rigid construction.
Amada have designed a series of heavy duty large capacity bandsaws to cope with adverse envir...
Bandsaw Machine HA400W
Amada designed the HA400W horizontal automatic bandsaw starting from the material to be sawn, engineering the machine around the capability of the saw blade, therefore guaranteeing optimum cutting performance.
Utilising a 41mm ...