Home > Associated Products > Co-ordinate Measuring Machines Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • TEST
  • Model:
  • ROUNDNESS TESTING FAG MOD. FMS 4210
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

FAG New05644 ROTATION AXIS "C AXIS": -Diameter of rotary table 200 mm -Max load capacity 500 N -Max control diameter 300 mm, se il tastatore è posizionato al di sopra del pezzo -Max passage diameter 420 mm -Air bearing -Roundness deviation (sensing direction axisl, measured acc. to ISO 1101) 0.08 ųm at the centre + 0.0008 ųm per mm measuring height -Roundness deviation (sensing direction axial measured acc. to ISO 1101) 0.08 ųm at the centre + 0.0008 ųm per mm radius -Drive: position controlled direct-current motor -Resolution angle measuring system 0.045° -Measuring speed 1.5/3/6/12 min¯¹, variable -Centering range +/- 2.5 mm -Levelling range +/- 30' -Tilting point 30 mm above table surface VERTICAL AXIS "AXIS Z": -Measuring distance 350 mm -Straightness deviation (acc. to ISO 1101) 0.25 ųm/100 mm - 0.8 ųm/350 mm -Air bearing -Position controlled direct-current motor -Resolution distance measuring system 1 ųm -Measuring speed 15,60,300 mm/min, variable, optimal -Moving speed 18 mm/s continuously adjustable by hand lever -Rectangularity relative to C axis: 0.5 ųm/350 mm in sensing direction 2.5 ųm/350 mm at an angle of 90° off the sensing direction HORIZONTAL AXIS "R AXIS": -Measuring distance 150 mm -Straightness deviation (measured acc. to ISO 1101) 1.0 ųm/150 mm -Slide bearing -position controlled direct-current motor -Distance measuring system 1 ųm resolution -Measuring speed variable -Moving speed 25 mm/s continuously adjustable by hand lever -Rectangularity relative to C axis'' SENSING SYSTEM ST200: -Inductive sensing system -Sensing direction bidirectional (no manual switching required) -Measuring range +/- 500 ųm for the 74 mm sensing stylus -Measuring force applied for the 74 mm sensing stylus -Deviation in linearity 1% of the measuring range maximum COMPUTING SYSTEM: -Evaluation computer: freely programmable computer system with colour graphics -Screen 14'' colour -Hard disk 20 MByte -Floppy disck drive 3,5'' -Output unit: dot-matrix printer (laser printer optional) DIMENSIONS: -Height 1720 mm -Width 1760 mm -Front-to-back size 815 mm -Weight 380 kg USED MATERIAL
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      ALPA
      Model:
      Bore gauge ALPA DA010
      Description:
      ALPA 10027 external 100-300mm resolution 0,01 mm used

      More Info

    • Manufacturer:
      Demag
      Model:
      DEMAGNETISER WITH BENCH
      Description:
      New01534 USED MACHINE

      More Info

    • Manufacturer:
      POLLARD
      Model:
      Pollard Corona 1EX Inline 4 Spindle Drilling Machine
      Description:
      Table Size 33’’ x 10’’ 2 Morse Taper Spindles Spindle speeds to 3000rev/min 3 Phase Electrics (415v) Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to ...

      More Info

    • Manufacturer:
      ELBO
      Model:
      PRESETTING ELBO CONTROLLI
      Description:
      ELBO CONTROLLI 08778 MOD. E238 ARA Axis X mm 140 (diam 280 mm) Axis Z mm 380 Rotary spindleholder interchangeable Base and column in grounded granite Special prismatic guides Double ball quills Spiral counterweight No. 1 comparator Setting 99 machine...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User