Table length: 600 mm. Table width: 210 mm. Number of T-channels: 4. T-channel width: 12 mm. Distance of the T-slots: 40 mm. Longitudinal travel (X-axis): 260 mm. Transversal travel (y axis): 150 mm. Vertical travel (z axis): 310 mm. Travel of the upper slide: mm. Distance from vertical spindle to table: 310 mm. Distance from horizontal spindle to table: 410 mm. from: 58 t/min. up to: 400 mm/min. Taper in spindle: 30 ISO. Feeds steps:: 10. longitudinal from: 12.0 mm/min. vertical from: 12.0 mm/min. longitudinal: 1.2 m/min. vertical: 1.2 m/min. Voltage 50 Hz 3x: 380 Volt. Motor output: 2.0 CV. Total power required: kVA. Machine's weight about: 700 kg. Length: 1500 mm. Width: 1100 mm. Height: 1600 mm.
FPT
09165
HYDROSTATIC
CNC HEIDENHAIN TNC 426CB
X axis travel 4000 mm
Y axis travel 2000 mm
Z axis travel 1200 mm
Max head revolutions 3000 , ISO 50 DIN 69871
Head indexed 2.5 degrees, reconditioned
Chain tool change 40 positions SIDEPLASMA
Internal c...
FARO
09295
PLATINUM 2.4
6 AXIS
PERFORMANCE SPECIFICATIONS:
Measuring range m 2,4
Volumetric accuracy mm +/- 0,036
Single point repeatability mm 0,025
FaroArm Weight Kg 9,5
HARDWARE SPECIFICATIONS:
Operating temp range 10°C - 40°C
Temperature range ...
The toe clamps are designed to clamp Chick OneLok or QwikLok to the t-slot table of a milling machine. They are generally used where a machine does not have a foundation installed. These low profile clamps are well clear of all moving parts and are c...