Centre height: 102 mm. Distance between centres: 375 mm. Swing over cross-slide: 120 mm. Swing over bed: 200 mm. Inner taper type: 20 W. Taper in tailstock:: 2 CM. Voltage 50 Hz 3x: 380 Volt. Spindle motor: 1.5 CV. Machine's weight about: 500 kg. Length: 1200 mm. Width: 700 mm. Height: 500 mm.
SARO
08219
MOD. SPA 710
height center mm 355
Turning Diametr on bed mm 710
Turnig Diametro on carriage mm 505
Turning Diametro on gap mm 950
Distance between center mm 5000
CAMLOCK C11
spidle bore mm 105
spindle speed N. 23 - rpm 8-1250
carriage stro...
The Chester twin pallet horizontal machining centres deliver productivity and performance, the key to this is to reduce the non-machining time to enhance the cutting efficiencies.
The range is divided into High Speed and High Performance CNC machine...
BERGONZI
06864
Max drilling on cast iron mm 40
Max drilling on steel mm 50
Arm straddle mm 1250
Arm travel mm 600
Head travel mm 1000
Max distance between spindle and base mm 1230
Spindle speed 40-1400 rpm (50 Hz) / 45-1620 rpm (60 Hz)
Spindle diamet...
DOOSAN
09613
TAILSTOCK
LIVE TOOLS
Y-AXIS
CNC FANUC 18iTB
CAPACITY:
Max diameter on the bed mm 600
Max diameter on the carriage mm 550
Max turning diameter mm 330
Max length mm 500
Bar diameter mm 76
Max piece weight kg 220
Max piece weight with tails...
