Home > Turning gears > Turning Lathes Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Model:
  • Vturn 36/85
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Genuine 45° slant bed for minimum distance from Z-axis ball screw to the tool tip. Z-axis ballscrew diameter 50mm. 91mm bar capacity. Box slideways with hardness HRC 55 for heavy cutting. Hydraulic 12″ chuck is offered as standard. 2-step gearbox is included to further enhance the cutting torque at low rpm. Maximum turning length 855mm for Vturn-36/85 and 1255mm for Vturn-36/125. Available with C-axis spindle and live tooling by Victor’s own VDI turret. Special LSB option with spindle nose A2-11 for bar capacity160mm/1300rpm.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      Vturn NP20
      Description:
      Machine width 1.93 metres Turning length 400 mm Available with BMT Live Tooling and C-axis as an option Rapid feeds 30/30 m/min Roller guideways Servo turret One-piece slant bed Rear/Right chip disposal Option for unmanned operation – requires a ro...

      More Info

    • Manufacturer:
      Model:
      Vturn 40 / 220
      Description:
      Heavy cutting lathe with spindle nose A2-11 for turning length from 1250mm to 4250mm. Bar capacity 91mm, Spindle speed 2500rpm. Single piece cast slant bed (45-degree) for minimum distance from ball screw to the tool tip Spindle bore A2-11 with hydra...

      More Info

    • Manufacturer:
      Model:
      Vturn A200
      Description:
      One piece 30˚ slant bed Large swing diameter 720 mm 8″ Power chuck / 4200 rpm Z-axis travel 600 mm High thrust force 1583 Nm High rapid feed 24/24 m/min (X/Z) Shortened belt driven spindle Rotary operation panel

      More Info

    • Manufacturer:
      Model:
      Vturn 40 / 425
      Description:
      Heavy cutting lathe with spindle nose A2-11 for turning length from 1250mm to 4250mm. Bar capacity 91mm, Spindle speed 2500rpm. Single piece cast slant bed (45-degree) for minimum distance from ball screw to the tool tip Spindle bore A2-11 with hydra...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User