Our 60 ton workshop press has a fixed cylinder and an in-height adjustable working table (motorised). Equipped with pressure regulation, manometer, 2 speeds and a joystick to move the piston up and down. With this joystick you are able to move the piston precisely, which makes this hydraulic press perfectly suitable for precision tasks. Additionally, this workshoppress is equipped with a hand pump for manual pressing jobs. Directly available from our stock in the Netherlands.
The Glorystar GS-C range offiber lasersare equipped with a 3m x 1.5m or 4.0m x 2.0m cutting area with a motorised front load table, which simply sides in and out of the machine. Material can be easily loaded and unloaded outside of the machine enclos...
KARCHER
09053
KARCHER KSM 750
FOR FLOORS
WITH BATTERIES
12V / 450W motor
Main brush 55 cm
Rotating side brush 16 cm
Efficiency in swept area 2800 m2/hour
USED
The 300 ton workshop press (model: 300 ton M/H-M/C-2 D=1750) is a heavy-duty motorised hydraulic press with a working width of 1750 mm for handling large materials. Equipped with a movable cylinder (left-right), in height adjustable work table (effor...