Home > Miscellaneous > Other Machines Go Back
REQUEST PRICE VIEW MAP

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Mitsubishi
  • Model:
  • 4500 WATT MITSUBISHI ML-3015LVP(PLUSII)-45CF-R CO2 LASER,MFG:2010
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Machine structure: Precision rack and pinion, direct drive Travel drive method: X,Y, Z simultaneous 3 axes Control method: X,Y, Z simultaneous 3 axis control X-Axis stoke: 122.05" Y-Axis stroke: 61.02" Z-Axis Stroke: 3.54" Maximum work piece size: 120.08" x 60.04" Maximum processing feed rate: 1180 inches per minute Maximum workpiece weight: 2050 lbs. Table pass height: 33.5" Rapid travel speed Single axis: 3345 inches per minute Simultaneous: 4730 inches per minute Minimum command input: 0.001mm/.0001" Drive motor type: intelligent AC servo Machine unit dimensions: 418.5" L x 90.6" H x 183" W Total system weight: 26,325 lbs. Pallet change time: Approximately 25 seconds Pallet changer weight: 4500 lbs. Pallet changer drive mechanism: chain Installation dimensions: 473.4" x 227.7" Floor space requirement: 750 sq. ft. Electrical requirements: 208 VAC +/- 5%, 3 phase, 60 Hz Motion system, CNC control: 71 KVA (Total machine usage) Laser resonator: 202 (Full load Amps) CNC controller specifications Model: Mitsubishi LC20BP2 Type: Self contained-simple dust proof design (mounted on processing machine) CPU: 64 Bit Display unit: 10.4" TFT color LCD touch screen Hard disc drive capacity: 2.0 GB Program memory capacity, standard: 5000m/approximately 2 MB with 400 register able programs CO2 laser control Power control: Output power, frequency duty Operation control: Shutter open/close, beam on/off. Laser gas change, etc. Processing machine control Drive method: X,Y, Z (Simultaneous control) Position detection: encoder Minimum command unit: .001mm/.0001" Program input method: 3.5" floppy, computer link, Ethernet LAN Operation method: Memory operation, HD direct drive Laser resonator specifications Model: Mitsubishi 45CF-R Excitation method: 3-axis cross flow, SD Control method: power feedback Power stability: +/- 1 % Beam mode: Low-order (main component TEM01) Beam outer diameter: 1.02" Beam divergence: Approximately 3.5" or less (total angle) Wave length: 10.6 microns Frequency setting range: 10~3000 Hz Duty range: 0~100 % adjustable Output power adjustable range: 0~100% of rating Resonator unit dimensions: 98.4" long x 71.3" High x 31.5" wide Resonator unit weight: 4850 lbs Rated output power (CW): 4500 watts Composition (CO2:CO:N2:He): 8:4:60:28 Consumption amount: 3 liters per hour Gas sealing time: 24 hours during continuous oscillation.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

fdbdgbdgb fxnjmynhtbgvfcd

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Amada
      Model:
      Amada THV1000 Double Headed Milling Machine
      Description:
      The fully automatic machining of all four surfaces without reclamping of the material results in high angular accuracy and parallelism. To complement their range of metal cutting machinery, Amada have launched a unique Twin Headed Milling Machine –...

      More Info

    • Manufacturer:
      Model:
      T-Slot Nut
      Description:
      Ground surfaces provide accurate positioning inside of t-slot. These nuts are manufactured from S45C(JIS) / CK45(DIN) heat treated to HRC 30-35 and have a black oxide surface finish.

      More Info

    • Manufacturer:
      Model:
      Serrated Block Stop
      Description:
      Stops to be used with free vices CP11. Serrated face for clamping rough components or for more heavy duty clamping. Hole parttern suits 50mm grid pattern for use on Leave base plates

      More Info

    • Manufacturer:
      Model:
      Analis oven
      Description:

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User