Home > Miscellaneous > Other Machines Go Back
REQUEST PRICE VIEW MAP

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Amada
  • Model:
  • Amada HFA400W automatic bandsaw
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Bandsaw Machine HFA400W The Amada HFA400W automatic bandsaw is a variation on the classic horizontal HA400 design incorporating improvements to blade and controls guaranteeing optimum cutting performance. Utilising a 41mm wide blade the Amada HFA400W has sufficient beam strength to enable it to cut any metal quickly and efficiently, up to its maximum capacity of 400mm, thus delivering an excellent cost-per-cut ratio. NC Rear Vice The rear vice is controled by an LED Programming unit situated on the control panel. Number of cuts, tolerance, and auto trimming functions can all be set by the unit. Up to 99 different programmes can be set. Tolerance The tolerance of the material to be cut can be set from +/- 0.1 to +/- 1mm Auto trim cut Material can be measured for the first cut from the front vice resulting in the trim cut being a cut component piece. Pressure/flow feed control The independent pressure and flow controls in series ensure that optimum cutting can be achieved regardless of the section or alloy being cut. Drive wheel transmission This is designed and built by Amada to provide high efficiency reduction, therefore delivering more power to the large diameter shaft. This ensures that developed torque is transferred to the blade. Maximum cutting capacity Round bar: 400 mm round bar Rectangular bar: 400mm wide x 400mm high Automatic, powered chip conveyor.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

fdbdgbdgb fxnjmynhtbgvfcd

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Linde
      Model:
      S Series hydraulic Cylinder
      Description:
      Kitagawa S Series hydraulic cylinders are made with high grade alloy steel. The S series cylinders are Kitagawa's standard range of hydraulic cylinder and are fitted as standard to a wide range of machines. These cylinders can be bought as a...

      More Info

    • Manufacturer:
      Cincinnati
      Model:
      90 TON X 8' CINCINNATI 90PF6, CINCINNATI CONTROL,MFG:2011,
      Description:
      Model: 90 PF x 8 Length nominal: 8' Clear distance between the housings: 6' -6 1/2" Total die surface: 8' Air bending capacity: 12 ga x 12' over 7/8" Vee or " x 5' over 2" Vee Maximum speed at full tonnage: 60 inches per minute Maximum tonnage at ful...

      More Info

    • Manufacturer:
      Sajo
      Model:
      Sajo DM 400 Heidenhain TNC 131
      Description:
      {"Stock number": "060473", "Serial number": "81177", "Longd. travel": "1600 mm", "Crosstravel": "500 mm", "Vertical travel": "610 mm", "Table": "2100x600 mm", "Spindle tapers": "ISO 50", "Spindle speed vertical": "20-1500 rpm", "Spindle speed horizon...

      More Info

    • Manufacturer:
      LNS
      Model:
      LNS SUPER HYDROBAR 6.32 HS-4.8,MFG:1998
      Description:
      General Specifications for LNS Type HYS 6.32 HS-4.8 barfeed Consisting of: A three-piece aluminum profile barrel assembly containing 6 steel guide tubes aranged in a concentric circle with manual indexing ring at the rear, and an automatics cen...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User