PIETRO CARNAGHI
09396
CNC SIEMENS
TECHNICAL DETAILS:
Distance between frames mm 3500
Maximum height between table top and spindle nose mm 1850
Working table dimensions mm 3000x16000
Working table capacity kN/m2 50
PORTAL:
Portal stroke (X axis) mm 16000
Portal feed speed (X axis) mm/min 0.5-10000
Portal rapid speed (X axis) mm/min 20000
MILLING HEAD:
Head section mm 480x480
Cross travel of the carriage on the crossrail - Y axis mm 4000
Vertical travel of the head - Z axis mm 1600
Spindle rotation speed in 2 ranges
-1 range rpm 6-185-750
-2 range rpm 25-750-3000
Spindle motor power (S1) kW 37
Max spindle torque at 185 rpm (1st range) Nm 1900
Y and Z axis feed speed:
-1 mm/min infinitely variable range 0.5-10000
Z axis rapid speed mm/min 20000
Y-axis rapid speed mm/min 40000
COMPLETE WITH:
-Automatic tool clamping
-Automatic clamping of accessories
-3 positions tool holder disk magazine
-120 positions tool holder chain magazine
-TV-35 VERTICAL MILLING AND DRILLING HEAD:
Type DD210
Distance between spindle and head plate mm 175
Spindle taper DIN 2079-50-AT4-CC
Spindle nose DIN 2979-B50
DIN 69871-B50 shank
DIN 69872-B28 tie rod
Automatic head clamping on machine
Head clamping force on machine daN 10000
Automatic tool clamping
Tool clamping force in the head daN 1900
Spindle speed 8-3000 rpm
Max power at 175 rpm kW 35
Max torque at 175 rpm Nm 1900
Input/output transmission ratio 1:1
Front flange coolant through spindle
Spindle air blowing system
Max bearing temperature 60 degrees
-TS-35 HORIZONTAL MILLING AND DRILLING HEAD:
Type DD230
Distance between spindle and head plate mm 200
Spindle taper ISO 50
Spindle nose according to DIN 2079-50 AT4 CC
Automatic tool clamping
DIN 6987-B50 shank
DIN 69872-B28 tie rod
Spindle speed 6-3000 rpm
Automatic head clamping on machine
Max power at 175 rpm kW 35
Max torque at 175 rpm Nm 1900
Input/output transmission ratio 1:1
C2 axis positioning 144x2.5°
C2 axis rotation speed rpm 3
Front flange coolant through the spindle
Spindle air blowing system
Max bearing temperature °C 60
-TVL S 400 VERTICAL MILLING AND DRILLING HEAD:
Type DD280SS
Distance between spindle and head plate mm 175
Spindle taper DIN 2079-50-AT4-CC
Spindle nose DIN 2979-B50
DIN 69871-B50 shank
DIN 69872-B28 tie rod
Automatic head clamping on machine
Head clamping force on machine daN 10000
Automatic tool clamping
Tool clamping force in the head daN 1900
Spindle speed 8-3000 rpm
Max power at 175 rpm kW 35
Max torque at 175 rpm Nm 1900
Input/output transmission ratio 1:1
Front flange coolant through spindle
Spindle air blowing system
Max bearing temperature °C 60
USED MACHINE
GIANA
07441
Live tools
Inclined bench
DOUBLE CARRIAGE
ECS 2302 CNC
Distance between centers mm 4300
Center height mm 430
Swing diameter on the bench guides mm 720
Swing diameter on the cross slide mm 710
Max piece weight between centers kg 6,000
SPIN...
MAS
07296
Drilling capacity steel 50 mm
Max distance between spindle and column 2070 mm
Vertical travel 1250 mm
Max angle rotation 360 degree
Spindle diameter 70 mm
Spindle travel 350 mm
Quilll morse taper Morse 4
Spindle speed 16-1800 Rpm
Spindle sp...
MORGEN
10136
Nominal force Ton 70
Table length mm 3.000
Distance between side frames mm 2.550
Distance between table and ram mm 300
V-opening mm 300
Table width mm 70
Approach speed mm/s 100
Working speed mm/s 7
Return speed mm/s 88
Back gauge travel...
BERARDI
TRP.MTE.OO18
Hole capacity max mm 28
N.12 hole
Surface dimensions mm 1100x850
Spindle taper CM 3
Spindle speed n.12 Rpm 75-1060
Max interaxis mm 700
USED MACHINE