SANGIACOMO
10103
C-FRAME PRESSES
Nominal force: 1300 kN
Nominal stroke: 7.5 mm
Adjustable stroke: 16÷200 mm
Stop position: TDC
Ram adjustment: 100 mm
Stop time: 190 ms
Strokes per minute min./max.: 10/55
Maximum mould surface: 600 x 1100 mm
Maximum closed mould height: 452 mm
Min. closed mould height: 260 mm
Upper mould mass: 140 kg
Flywheel revolutions per 1°: 411
Max. insertions at 1°: 28
Installed power: KW 11
Voltage: V400
Auxiliary voltage: V24
Operating air pressure: BAR 5.5÷6
Mass: Kg. 10,000
Motorized hammer adjustment
Hydraulic overload safety
Speed regulation
USED MACHINE
FAMUP
09646
LINEAR DRIVE
MOVING COLUMN
CNC SELCA 4045 PD
TABLE:
Table size mm 1.600x650
T-slots mm 5x18x125
Max load Kg 1000
TRAVEL:
Longitudinal X axis 1200 mm
Cross Y axis 650 mm
Vertical Z axis 600 mm
Rapid feeds X/Y/Z m/min 60/60/30
SPINDLE:
Spin...
PARPAS
09208
CNC SELCA 1200
Longitudinal stroke mm 1750
Cross stroke mm 750
Vertical stroke mm 650
Dualspindle milling head
Taper DIN 69871-40
Tool change 30 positions
USED MACHINE
09367
Drilling capacity on steel mm 30
Drilling capacity on cast iron mm 40
Arms mm 915
Spindle speed from 40 to 2000
EQUIPPED WITH:
-Cube mm 550x450x500H
USED MACHINE