MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Model:
  • MILLING BOMAC MOD. FU150ST
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

BOMAC 09874 TECHNICAL FEATURES: TABLE Dimensions 500x1000 mm Vertical table 250x1200 mm Table T-slots mm 14x63 No. 5 Vertical table T-slots mm 14x63 No. 3 Table load 360 kg STROKES X axis (manual/automatic) 600 mm Y axis (manual/automatic) 500 mm Z axis (manual/automatic) 400 mm VERTICAL SPINDLE Spindle nose ISO 40 Speed ranges No. 18 Spindle speed rpm 40–3200 Quill stroke 100 mm Head rotation ± 90° degrees Distance between spindle nose-table 58–460 mm Spindle center – column mm 180 min. Spindle center – column mm 680 max HORIZONTAL SPINDLE Spindle nose ISO 40 Speed ranges No. 18 Spindle speed 40–3200 FEEDRATE X,Y,Z mm/min. 0–600 RAPID FEEDRATE X,Y,Z mm/min. 1000' MOTORS Vertical and horizontal Hp/kw 5/3.75 3-axis table kw 0.75 Electric pump 0.09 kW Voltage 400V-50 Hz – 3 ph. NET WEIGHT 1814 kg MACHINE CONFIGURATION: -X,Y,Z ball screws class C5 with double nut -Precision bearings resistant to high temperatures -Independent motors for each axis X,Y,Z with INVERTER -All axis are equipped with electromagnetic clutch for better braking -Wide axis travel, both manual and automatic -Finned bellows cover for the upper side of the “Z” axis -The gears of the gearbox are all with module 2.5 mm and heat treated -High spindle speed 3200 rpm -“Z” axis equipped with brake, keeps the table stable -Standard automatic lubrication -The lubrication system is equipped with control valves to ensure that all parts, guides and screws, are lubricated STANDARD ACCESSORIES: -Control panel -Vertical head -Electrical system compliant with CE standards -Spindle safety guard -Spindle shaft mm. 27 -Shaft support -Axis inverter -Lighting lamp -Guide and screw lubrication system -Handwheels with axle safety release -Electric refrigeration pump -Rubber X and Y axis covers -Upper Z axis cover with finned bellows -Chip collection tank EQUIPPED WITH: -D.R.O. 3-axis X,Y,Z FAGOR -Pneumatic screwdriver only for vertical -Rotary table 450x800 mm slots n. 5/14x63 dimensions 895x450xh350 mm Rotation. 360° Forward/backward inclination ±45°/right-left ±30° NEW MACHINE COMPLYING WITH CE STANDARDS PROMPT DELIVERY
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    • Manufacturer:
      Description:
      FIAS BERICO 05878 Axis X mm 960 Axis Y mm 350 Axix Z mm 400 Spindle taper ISO 40 Spindle speed rpm 55-4250 USED MACHINE

      More Info

    • Manufacturer:
      Description:
      SICMI 08068 Ton. max 100 Max pressure bar 350 Approach speed mm/sec 25 Working speed mm/sec 2 Cylinder stroke mm 500 Distance between frames mm 1050 Max distance table piston mm 900 Motor power Kw 2 Machine weight Kg 1100 EQUIPED WITH: Working table ...

      More Info

    • Manufacturer:
      Description:
      WEMI 09757 Input voltage 230/400V - 50/60Hz Duty Cycle 86.7/50.2 A at 60% Duty Cycle 67.5/39.1 A at 100% Power 60% 32.9 KVA Power 100% 25.6 KVA Wire diameter 0.6-1.6 mm Electrode diameter ≤ 6 mm IP23 protection rating H isolation Approx. dimensions...

      More Info

    • Manufacturer:
      Description:
      09916 2 SHELVES USED MATERIAL (N.2 PIECES AVAILABLE)

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User