Manual actuators for use with the Miteebite range of ID Xpansion clamps. These Actuators are specifically designed for gripping the ID of blind holes but may also be incorporated in many applications that require a straight draw actuated 90 degrees from the drive screw. They are capable of gripping on bores ranging from 4.1mm to 35.3mm using our standard ID clamps. Both styles of Actuators come completely assembled with the heat-treated cylinders tapped for the following clamp drive screws: M2, M4, M6, M8, M10 and M12.
Swing over bed 460 mm,Swing over cross slide 250 mm,Swing in the Gap 800 mmdistance between centre 1250 mm.Spindle Speeds 30 -1500 rpmSpindle bore 90 mmC/w 3 & 4 jaw chucks, Travelling Steady, (Fixed Steady body its missing inserts) Quick Change tool...