Manual actuators for use with the Miteebite range of ID Xpansion clamps. These Actuators are specifically designed for gripping the ID of blind holes but may also be incorporated in many applications that require a straight draw actuated 90 degrees from the drive screw. They are capable of gripping on bores ranging from 4.1mm to 35.3mm using our standard ID clamps. Both styles of Actuators come completely assembled with the heat-treated cylinders tapped for the following clamp drive screws: M2, M4, M6, M8, M10 and M12.
Swing over bed 350mm. Swing in gap 535mm. Swing over cross slide 196mm. Distance between centres 650mm. Spindle nose D1-4. Spindle speeds to 3250rpm. Spindle power 7.5kW. Spindle bore 42mm. Tailstock quill dia. 63mm. Tailstock quill stroke 140mm.Tail...
