The gripping pull-back action of our Pullback Collet Chuck (16C) to actuate the collet chuck. Means the workpiece will be moved slightly in the Z-Axis. This is normally acceptable for first operation work and the work piece position can easily be determined with a facing cut. The 5C and 16C collets have been designed with a long small nose diameter allowing for good clearance for tooling. All collet closers are case hardened and ground optimising the rigidity, strength and durability.
One of the fastest and strongest milling clamps available anywhere, these clamps are easily set up and broken down, making them ideal for odd-shaped parts and short cycle times. The worm-and-gear design ensures that the clamp will not loosen with use...
This split V Block can be combined with SU15 to create an adjustable V Block set which will accept workpieces with diameters from 50mm to 600mm. They can be incorporated into dedicated fixtures or mounted to standard baseplates and t-slot tables to i...