Code: ST3643 Model: Integrex E-1850V/12 IIYear: 2011Control: Mazatrol Matrix STANDARD SPECIFICATION CAPACITY Maximum workpiece diameter : 2,350 mm Maximum workpiece height : 1,800 mm X axis stroke : 3,055 mm Y axis stroke : 1,850 mm Z axis stroke : 1,800 mm B axis stroke : 150º C axis stroke : ± 360º Distance from centre of B axis rotation to centre of pallet : 2,130 mm Distance from spindle nose to centre of pallet : 1,830 mm Distance from centre of B axis rotation to top surface of pallet : 100-1,900 mm Distance from spindle nose to top surface of pallet : -200-1,600 mm Pallet load (evenly loaded) : 7,000 kgf MILL SPINDLE Mill spindle nose type : 7/24 taper, No 50 Mill spindle speed : 35-10,000 rpmNumber of mill spindle speed change ranges : 2 steps (electric)ID of mill spindle bearing : 100 mmMill spindle drive motor : 30 min rating - 37kWContinuous rating - 30kWMill spindle index : 5º clampFEEDRATERapid traverse (X, Y, Z axis) : 40,000 mm/minCutting feedrate (X, Y, Z axis) : 40,000 mm/minB axis tilting speed : 30 rpmC axis rotation speed : 6.7 rpm TABLETurning operation spindle - spindle speed : 5-250 rpmNumber of spindle speed change ranges : 2 steps (electric)Spindle drive motor : 30 min rating - 45kWContinuous rating - 37 kWPallet change time : 50 secondsRepeatability in pallet changes : within ± 5µmMutual differences in pallet changes : within 15µmTable indexing : 0.0001º x 3,600,000 positions (NC rotary)Pallet top surface height (from floor level) : 1,600 mm ATC TOOL MAGAZINETool storage capacity : 80Tool selection system : fixed address of the magazine, auto short path selectionTool shank type : CAT50Retention bolt type : Yamazaki ANSI typeMaximum dia of tool in magazine : with adjacent tools - Ø 135 mmwithout adjacent tools - Ø 260 mmMaximum tool length : 650 mmMaximum weight of tool : 30 kgfTool change time (chip to chip) : 8.5 seconds TANKSLubricating oil tank capacity : 3 litresSpindle cooling fluid tank capacity : 70 litresHydraulic unit tank capacity : 46 litresTable lubrication tank capacity : 20 litresCoolant tank capacity : 1,300 litres MACHINE DIMENSIONS Height : 5,760 mm Width : 6,752 mm Depth : 11,238 mm Weight : approx 60,000 kgf POWER SOURCE Voltage (3 phases) 220/220V ± 10%380/400/415/440V ± 10%460/480V ± 10% Frequency : 50/60Hz Capacity : 30 min rating - 141kVA Continuous rating - 128kVA AIR SOURCE Pressure : 0.5-0.9MPa Capacity : 550 litres/min
If you are happy with your details above please tick the box and click the send button.
D175 Varibore Square collets are to suit 80mm capacity collet chucks. Also known as N175, these collets have a 3.175mm range. Supplied smooth as standard we can supply with alternate finishes and in special profiles.
D175 suit the following collet...
