<p>
<br/>
EQUIPPED WITH: <br/>
<br/>
EXTREMELY HIGH QUAILITY PURIFICATION<br/>
Removes metallic fines and other solids down to one micron.<br/>
Separates tramp fluids down to one quarter of one percent (.0025).<br/>
Reduces coolant waste by removing the entrained coolant in the tramp <br/>
oil and rag layer.<br/>
<br/>
VERSATILE PLANTWIDE APPLICATION<br/>
Single system can serve single or multiple formulations; single or multiple<br/>
locations; and different fluids.<br/>
Processes any make or type of coolant or oil.<br/>
A 500 gallon process tank provides inflow to the recovery system.<br/>
A stainless steel basket strainer provides preseparation of course solids.<br/>
A progressive cavity pump provides a homogenous and constant feed flow to the<br/>
<br/>
system achieving maximum centrifuge effiency. Hydraulic agitation in the dirty<br/>
<br/>
tank keeps tramp oil and solids suspended for further treatment.<br/>
An intermediate stage solids separation is accomplished using a hydrocyclone<br/>
<br/>
for coolant. This process limits particle size to less than 30 microns.<br/>
A thermostatically controlled low-watt density heater provides:<br/>
Improved separations of solids and tramp oil.<br/>
Improved cleanliness inside the centrifuge thus reducing maintenance.<br/>
Removal of any dissolved gases such as H2S<br/>
Reduced disposal of recoverable coolant entrained in the rag layer,<br/>
<br/>
(coolant/tramp oils interface)<br/>
<br/>
Pasterizes the fluid reducing the need for biocides and fungicides.<br/>
A heat exchanger in the system allows for heat transfer from the discharging<br/>
<br/>
clean fluid to incoming dirty fluid, minimizing energy usage and lowering the<br/>
<br/>
fluid temperature to reduce biological regrowth and to keep the sump<br/>
<br/>
temperature from increasing.<br/>
A high speed disc centrifuge accomplishes a highly efficient<br/>
<br/>
liquid/liquid/solid separation. Lighter phase oils are separated from heavier<br/>
<br/>
phase water without degrading coolant emulsions. Solids are automatically<br/>
<br/>
ejected at preset intervals and the centrifuge is flushed with water heated by<br/>
<br/>
the IFR, eliminating the need for regular bowl cleaning.<br/>
Recovered liquid is discharged to the clean tank for reuse as new oil or<br/>
<br/>
coolant. Tramp fluids are automatically discharged as disired. Automatic<br/>
<br/>
coolant makeup using a proportioner and, if required, deionized water brings<br/>
<br/>
the recovered fluid to like new standards.<br/>
Controls: System control automatically sequences and monitors process flow and<br/>
<br/>
temperature, allowing unattened operation.<br/>
<br/>
SPECIFICATIONS:<br/>
<br/>
Typical Specifications for S1700 Patriot<br/>
<br/>
Dimensions: Length: 8.5<br/>
Width: 8.4<br/>
Height: 8.0<br/>
Weight: 2500 lbs.<br/>
Fluid Input: Coolant: 3000 GPD<br/>
Oil: 4000 GPD<br/>
Utility Requirements:<br/>
Electrical: 460 VAC 3 PH, 60 HZ, 30 AZP<br/>
Water: City water for purging - 1 liter<br/>
<br/>
<br/>
Deionized water for make-up, 2-10 GPM (if required)<br/>
Control and Indicating Panel: NEMA 12 Enclosure. Solid state<br/>
<br/>
programable control including: audible/visible alarms, automatic/manual mode<br/>
<br/>
selector.<br/>
<br/>
<br/>
F.O.B., Warren Mich<br/>
<br/>
<br/>
<br/>
</p>.
Rotary table dimensions:
mm 1100x1300 Longitudinal stroke mm 1200 Cross travel mm 2000 Vertical stroke mm 1500
Boring spindle diameter mm 100 Boring spindle stroke mm 700
"Ajax range of Horizontal Borers bring back the tradition of using one machine for many different aspects of machining. So any job with milling , drilling, boring & facing big & small work pieces."
