CHEVALIER
09309
MOBILE COLUMN
Control Isurface with display touchscreen 10.4''
WORKING CAPACITY:
-Max grinding lenght 1200 mm
-Max grinding width 500 mm
-Max distance spindle axis/table surface 730 mm
TABLE (X AXIS):
-Surface 1.200x500 mm
- "T slots" width (Nx3) 14 mm
-Interaxis between "T slots" 170 mm
-Adjustable working speed with continuity 5:25 m/min
-Max longitudinal axis 1.300 mm
-Max load 1.170 kg
CROSS (Y AXIS):
-Max cross axis 560 mm
-Adjustable working speed with continuity 0-450 mm/min
-Min. cross increase programmable 0.001 mm
VERTICAL (Z AXIS):
-Max cross axis 560 mm
-Vertical feedrate 0.2-250 mm/min
-Min. vertical increase programmable 0.001 mm
SPINDLE:
-Power 11/15 kW (opz 18.5/25)
-Wheel size (IS0 525) 355x50x127-200x10 mm
-Wheel speed 500-1.800 Rp,
HYDRAULIC UNIT MOTOR (3 PHASE):
-Power 5 Hp
MASS:
-Overall size 5300x3040x2200 mm
-Approx net machine mass 7900 kg
STANDARD ACCESSORIES:
-Easy and intuitive numeric control with simplified cycles for surface grinding, zig zag and steps
-Automatic roughing and finishing increase
-Cycle interruption option for inspection and final dimensional setting
-Balancing Alert: the acceleration indicator monitors and assists during wheel balancing
-Rotating and positionable control panel
-Wheel speed variator
Spindle load measurement
-Screws and guides hardened and ground
-Sliding axes on high precision rolling
-High strength spindle with double set of P4 class angular contact ball bearings
-Proportional hydraulic drive for longitudinal table movement (X)
-Quick adjustment device of longitudinal and cross stroke
-MPG remote handwheel with minimum increment 0.001 for Y axis
-Protection cover
MACHINE COMPLETE WITH:
-Wheel holder plate with extractor
-Grinding wheel 405x50x127 mm
-N.1 Electro-permanent magnetic table 1.200x500 mm with control unit
-Electronic grinding wheel balancer
-Halogen lamp
-Heat exchanger for electrical cabinet
-Support and leveling feet
-Dressing diamond with diamond
-Automatic dressing device with compensation mounted on the table
-Cooling system with paper filter and automatic magnetic separator, 120 L tank
-Use and maintenance manuals
NEW MACHINE COMING SOON
ROSA
08155
CN ROSA SYSTEM
Longitudinal stroke mm 1350
Grinding longitudinal mm 1250
Table surface mm 1200x450
Max load in table Kg 1300
Cross stroke mm 550
Grinding cross mm 610
Grinding vertical height mm 480
Wheel speed rpm 1450
Wheel dimensions mm...
ROSA
07234
Tangential wheel and rectangular table
Longitudinal travel 700 mm
Cross travel 300 mm
Distance between table and spindle mm 300
Grinding diameter mm 300
Grinding width mm 40
Equipped with:
Magnetic plate 600x300 mm
USED MACHINE
MAGNAGHI
RTF.SCE.O186
Min. grinding diameter mm 2
Max grinding diameter for tool mm 150 x mm 85
Max grinding diameter for pipe mm 200 x mm 100
Tickness, hole, operating grinder diameter mm 350x120x200
Tickness, hole, driver grinder diameter mm 250x1...