Home > Spares & Accessories > Saw Blades Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Model:
  • Julia coated HSS circular saw blades – Silver Fox
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

Julia coated HSS circular saw blades using a P.V.D. multi-layer coating with a thickness of 2.5 µm opaque grey coloured. The particular and innovative mix of noble elements which compose it gives it a hardness of 3.650 Vickers (HV 0.05) not reached by any other coating. This new coating is very tenacious, very resistant to high temperatures (far over the hardening limit of the HSS blades) but, it differs from other coatings because it doesn’t need to reach high temperatures to obtain the best performances. It is highly recommended for high speed cuts (HSC) with critical cutting parameters, where the performance losses due to the cutting speed increase is sensibly lower than with other traditional coating. The friction coefficient is 0.45 and this permits to use the circular saws both when cutting without or with low cooling or mist lubrication or flood coolant. Suitable for cutting high alloyed steels up to 1000 N/mm², stainless steel and all material developing a high thermal energy.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Dah Lih
      Model:
      Dah Lih DCM-2213
      Description:
      {"Table Size": "2500mm x 1350mm", "X Axis": "2200mm", "Y Axis": "1300mm", "Z Axis": "760mm", "Spindle Speed": "3500rpm, 6000rpm, 8000rpm, 10000rpm, 12000rpm, 15000rpm", "Spindle Motor": "15hp, 25hp, 30hp, 35hp", "Spindle Type": "BBT 40, BBT 50 or DIN...

      More Info

    • Manufacturer:
      Model:
      Steam Oxide Vapo Coated Saw Blade
      Description:
      Standard blades are steam oxide coated | Use Addicut flood coolant to prevent pick up and over heating. | M2 or M35 Cobalt | Designed for slow RPM cutting - 40/80rpm | Suitable for ferrous & non ferrous materials | Available in all common sizes | Scr...

      More Info

    • Manufacturer:
      Model:
      Wikus Cubogrit® S CBN Grit Edge Blade
      Description:
      World leading performance guaranteed | high-alloy tool steels > 55 HRC | hardened high speed steel (HSS), case-hardened steels | High quality surface finish | Higher cutting rates | Low vibration and smooth running

      More Info

    • Manufacturer:
      Dah Lih
      Model:
      Dah Lih DCM-4225
      Description:
      {"Table Size": "4000mm x 2200mm", "X Axis": "4200mm", "Y Axis": "2500mm", "Z Axis": "800mm", "Spindle Speed": "3500rpm, 6000rpm, 8000rpm, 10000rpm, 12000rpm, 15000rpm", "Spindle Motor": "15hp, 25hp, 30hp, 35hp", "Tool Storage": "32, 40, 60 Tools", "S...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User