~44,524 Resonator Hours and ~47,343 On Hours as of October 2024
Specifications
Travel method: X & Y - axis beam move
Drive method: X Rack & Pinion, Y & Z Ball screw
Work area
X= 121"
Y= 61"
Z= 7.87"
Maximum thickness
7/8" mild steel
1/2" stainless steel
3/8" aluminum
Maximum work weight: 2000 lbs
Rapid traverse
X & Y: 3,150 inches per minute
Simultaneous: 4455 inches per minute
Z: 2, 362 inches per minute
Repeatability: +/- 0.0002"
Z-axis sensor: HS-2007
CNC: AMNC PC-OS; windows embedded
Assist gas control: Automatic select
Approximate machine weight: 34,216 lb. (includes shuttle tables)
Power requirements: 200/220V +/- 10% 50/60 Hz
CNC controller
Model: AMNC-NT
Display: LCD color graphics display
Control function
X,Y,Z-axis simultaneous and focus lens B-axis, adaptive optic and laser power
control (CW, gated pulse, pierce routines, etc.)
Data input method: Touch screen, keyboard, ethernet, wireless, CD, USB, 3.5"
floppy disk
Minimum command unit: 0.0001" (X,Y,Z)
Minimum travel unit: 0.0001" (X,Y,Z)
Standard memory: 2 MB
Hard drive: 10 GB
Operating modes: Automatic and manual
Display modes: Program contents, position information, program check,
settings, parameters, beam diameter compensation, assist gas status, self-
diagnostics
Interlock displays: Cooling water status, gas pressure status, vacuum status,
turbo blower malfunction, shutter status beam power, resonator discharge, door
open, WACS
Equipped with
Orion Chiller
Camfil Gold Series Dust Collector a/ HEPA Exhaust Filter
Orion Beam Purge
Additional Information
Covered by Amada's AMP service plan throughout its life
All Maintenance and service work was performed by Amada personal
FANUC Turbo was replaced in March 2020 (23,994 hours) by FANUC. Vacuum pump
was replaced at that time with an oilless unit.
Kitagawa chucks are manufactured from high grade alloy steel. The ML series chucks or mega-long stroke chucks are used for multidiameter gripping and large flange work.
ML series chucks are supplied with a blank drawnut as standard with a set of T...
This split V Block can be combined with SU15 to create an adjustable V Block set which will accept workpieces with diameters from 50mm to 600mm. They can be incorporated into dedicated fixtures or mounted to standard baseplates and t-slot tables to i...
