1.1 Motion Package
Travel Method: X axis for work piece movement, Y axis for cutting head
movement
Control Method: X, Y & Z simultaneous 3 axis control and B axis
Drive Motors: FANUC AC Servo (X, Y, Z and B)
Maximum Sheet Size: 61" (Y) x 198" (X) with one repositioning cycle
Maximum Axis Travel: 61" (Y) x 99" (X) x 11.8" (Z) x 0.78" (B)
Maximum Cutting Speed: 2362 IPM
Maximum Table Speed: 3,149 IPM. Per axis (4,454"/min. 45O vector)
Maximum Speed - Z-Axis: 2362 IPM
Positioning Accuracy: 1: 0.0004"/20"
Repeatability: 0.0002"
Maximum Material Weight: 727 lbs. (5' x 10' x 3/8" or 4' x 8' x 1/2")
Number of Clamps: 3
Work Chute: 66" (Y) x 21" (X)
Assist Gas: 4 ports, part program selectable
Machine Size (WxDxH): 99" x 225" x 90"
Machine Weight: 13,640 lbs including laser resonator
Electrical Requirements: 208 VAC, 3 phase, 60 Hz., 10 KVA
(1) Processing accuracy will be different
1.2 CNC Controller
Model AMNC-F
Display: LCD Color Graphics Display
Control Function: X, Y, Z-Axis Simultaneous and Focus Lens B-axis, Adaptive
Optic and Laser Power control (CW, Gated Pulse, Pierce Routines etc.).
Data Input Method: Touch screen, Keyboard, Ethernet, Wireless, CD, USB, 3 1/2"
Floppy disk
Minimum Command Unit: 0.0001" (X, Y, Z)
Minimum Travel Unit: 0.0001" (X, Y, Z)
Standard Memory: 2 MB
Hard Drive: 10 GB
Operating Modes: Automatic and Manual
Display Modes: Program Contents, Position Information, Program Check,
Settings, Parameters, Beam Diameter Compensation, Assist Gas Status, Self
Diagnostics
Interlock Displays: Cooling Water Status, Gas Pressure Status, Vacuum Status,
Turbo Blower Malfunction, Shutter Status, Beam Power, Resonator Discharge,
Door Open, WACS.
Electrical requirements: See Motion Package.
NUMBER OF PALLETS 2 (ONE FOR RAW MATERIAL, ONE FOR FINISHED PARTS)
MAX. WEIGHT PER PALLET 3000 Kg
MATERIAL SIZE MIN. 900 x 900 -MAX. 1525 x 3000 mm
MAXIMUM LOADING HEIGHT MATERIAL: 225mm (INCLUDING PALLET)
PARTS: 320mm (INCLUDING PALLET)
MATERIAL TH...
Set of three replacement base jaws. Base jaws are normally replaced in the event of a crash. Please check the condition of slide ways in the chuck before replacing. Replacement of base jaws will not necessarily increase accuracy. Any damage or wear t...
