Home > Miscellaneous > Other Machines Go Back
REQUEST PRICE VIEW MAP

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Amada
  • Model:
  • Amada HFA400W automatic bandsaw
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Bandsaw Machine HFA400W The Amada HFA400W automatic bandsaw is a variation on the classic horizontal HA400 design incorporating improvements to blade and controls guaranteeing optimum cutting performance. Utilising a 41mm wide blade the Amada HFA400W has sufficient beam strength to enable it to cut any metal quickly and efficiently, up to its maximum capacity of 400mm, thus delivering an excellent cost-per-cut ratio. NC Rear Vice The rear vice is controled by an LED Programming unit situated on the control panel. Number of cuts, tolerance, and auto trimming functions can all be set by the unit. Up to 99 different programmes can be set. Tolerance The tolerance of the material to be cut can be set from +/- 0.1 to +/- 1mm Auto trim cut Material can be measured for the first cut from the front vice resulting in the trim cut being a cut component piece. Pressure/flow feed control The independent pressure and flow controls in series ensure that optimum cutting can be achieved regardless of the section or alloy being cut. Drive wheel transmission This is designed and built by Amada to provide high efficiency reduction, therefore delivering more power to the large diameter shaft. This ensures that developed torque is transferred to the blade. Maximum cutting capacity Round bar: 400 mm round bar Rectangular bar: 400mm wide x 400mm high Automatic, powered chip conveyor.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

fdbdgbdgb fxnjmynhtbgvfcd

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Siemens
      Model:
      DMU MORI DMU 75 monoBLOCK 5 Axis Vertical Machining Centre with Siemens 840D Control. Year 2021
      Description:
      Table size 800mm x 650mm. X/Y/Z travels 750mm/650mm/560mm. Maximum feeds X/Y/Z 40m/min. Spindle speed 20,000 rpm. Spindle power 35kW (40% duty cycle) & 25kW (100% duty cycle). Spindle taper SK40. Double gripper tool change system. 60 ATC. Rotary tabl...

      More Info

    • Manufacturer:
      Chester
      Model:
      CHESTER H500LB HORIZONTAL MACHINING CENTRE
      Description:
      The Chester twin pallet horizontal machining centres deliver productivity and performance, the key to this is to reduce the non-machining time to enhance the cutting efficiencies. The range is divided into High Speed and High Performance CNC machine...

      More Info

    • Manufacturer:
      Model:
      Adaptor Plate
      Description:
      Standard spindle adaptors to suit power chucks with a 220mm recess. Range of adaptors to suit different spindles heads. High accuracy taper and outer diameter.

      More Info

    • Manufacturer:
      Model:
      NN - 160x55 (M641)
      Description:
      {"Brand": "NN", "Machine no": "M641", "Type": "160x55", "Machine clamp": "", "jaw width": "160 mm", "jaw height": "55 mm", "Max. clamp opening": "290 mm", "In stock": "4"}

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User