Manual actuators for use with the Miteebite range of ID Xpansion clamps. These Actuators are specifically designed for gripping the ID of blind holes but may also be incorporated in many applications that require a straight draw actuated 90 degrees from the drive screw. They are capable of gripping on bores ranging from 4.1mm to 35.3mm using our standard ID clamps. Both styles of Actuators come completely assembled with the heat-treated cylinders tapped for the following clamp drive screws: M2, M4, M6, M8, M10 and M12.
SAFOP
07383
4 GUIDEWAYS
LIVE TOOLS
AXIS C
DOUBLE CARRIAGE WITH INDIPENDENT CONTROL
CNC ECS 2400
Height of center mm 430
Distance between center mm 8500
Diameter over the carriage smm 560
Diametro over the bed mm 915
Motor power kW 50
EQUIPPED WITH:
-...
