HFE 1703S is a 187 ton, down-acting hydraulic press brake with a bedlength of 10 feet. There are 148" between the frames, with an open height of17.7". The maximum travel distance of the ram is 7.0", and the maximum bendlength that can be formed is 171". The ram repeatability is 0.0004", whilethe backgauge can travel 27.5".The HFE 1703S has an Operateur CNC control, which is used to control theram and backgauge, as well as other appropriate functions. The control has theability to program the machine in either GRAPHICS Mode, ANGLE Mode, DEPTH Modeor to reverse the ram based on tonnage. The HFE 1703S also features a 16"throat, sectionalized punch holders with fast release clamp, a larger brakefor staging a variety of complex parts, a foot pedal, and a hand wheel.System SpecificationsPress BrakeCapacity: 187 U.S. tonsBed Length: 122 inchesMaximum Stroke Length: 7.8 inchesOpen Height: 18.5 inchesThroat Depth: 16.5 inchesDistance Between Side Frames: 106 inchesRam Repeatability: +/- 0.0004 inchesAdvance Speed: 472 IPMPress Speed: 2 - 47 IPMReturn Speed: 2.4 - 472 IPMOverall Weight: 25,520 lbs.Overall Dimensions: 14' L x 8' W x 9'6" HMachine Power: 27.5 KWFoundation: 6 inch concrete slabBackgaugeModelAmada Type BRepeatability: X Axis +/- 0.0004 inchesMovement RangeX Axis 27.5/37.5 inchesR Axis 9.84 inchesZ Axis 137 inchesFeed SpeedX Axis 19.5 inches per secondR Axis 6.2 inches per secondZ Axis 39.3 inches per second .
COVEMA
07786
Height center mm 190
Distance between center mm 1250
Swing over bed mm 390
Swing over cross slide mm 240
Swing in gap mm 610
Spindle bore mm 54
Soindle bore taper MT No.6
Spindle speed n.16 - rpm 25-2000
Motor power kW 5.5
Width of bed m...
