Stops to be used with free vices CP11. Smooth face more suited to second operation work or when you cannot make the component. Hole parttern suits 50mm grid pattern for use on Leave base plates
DCD collet changing gun are required for the changing of DC collets. The gun collapses the collet down so it can be placed into the collet and released into position.
The gripping pull-back action of our Pullback Collet Chuck (5C) to actuate the collet chuck. Means the workpiece will be moved slightly in the Z-Axis. This is normally acceptable for first operation work and the work piece position can easily be dete...
The gripping pull-back action of our Pullback Collet Chuck (16C) to actuate the collet chuck. Means the workpiece will be moved slightly in the Z-Axis. This is normally acceptable for first operation work and the work piece position can easily be det...
This split V Block can be combined with SU15 to create an adjustable V Block set which will accept workpieces with diameters from 50mm to 600mm. They can be incorporated into dedicated fixtures or mounted to standard baseplates and t-slot tables to i...