The Vacmagic VM100 was primarily designed for grinding non-ferrous material on a magnetic chuck.
During the early stages of R & D it was discovered the VM100 could be much more.
Clamp the Vacmagic VM100 in a vise to reduce setup time, use as a pallet changer or mount to a grid plate or T-slot table.
The VM100 uses the same patented method as the VM300 to produce a vacuum strong enough for industrial applications
but still operates on shop air!
No need for vacuum pumps and coolant traps.
We include everything necessary to get your VM100 running within minutes of opening the box.
Will also accept the standard VM300 Vacuum pallet for increased vacuum platform as well as Vacmagic gasket material.https: //www.1mta.com/product-category/milling/vacuum-workholding/.
CNC setting of the cutting data (20 job programs) | 5.6" Colour TFT touch screen panel | Option for TR12 intergrated drilling/tapping unit | TR12 available w/ CNC Y axis movement for drilling variable centrelines | Material out detection | Cutting le...
NC24-L with 1000mm feeder NC24-LB with 2500mm feeder | NC24-LS versions with servo feed of the sawblade | Large capacity with linear blade feed system | Hydraulic feed of the saw blade carriage | Piece separation system to eliminate back cutting mark...
Manual setting of the cut length with micrometer | Digital setting of the number of pieces to be cut | Option for TR12 integrated drilling unit | Material out detection | Cutting length tollerance = +/- 0.1mm | Max feeder stroke 300mm with double ind...
