Model: X-2040 S/N: 1220 X337 Year: 2020 Total hours cut: 1216.3 Footprint: 2865mm x 5425mm One Carriage X-Y Cutting Area: 80" x 157.2" Z-Axis Travel: 12" Software: MOVE, WARDCAM Power requirements (Gantry): 230V, 30 Amps, 3 phase Air requirements: 80psi , 2cfm Max number of Z Carriages: 2 Bulk Feed Hopper: SmartFeed 400/ Axxiom 1000lb Hopper Drive Mechanism: Ballscrew in all Axes Linear Positional Accuracy: ±0.003" per 3ft per axis Repeatability: ±0.001" per axis Speed: 0.01 in/min - 900 in/min.
BP04 Machinable Fixture Plate
Cast iron plain fixture plate with holes for side location.
Plain to allow for the machining of hole patterns and features required for specific fixtures. Ground flat parallel and perpendicular for accuracy.
Des...
Guidance channels are the heart of every loading magazine and therefore very important for best turning results.
Breuning IRCO supplies guide channels for the loading magazines of the PROFImat, ecoProfi and SiMag series with different diameters.
Modern Engineering, Classic Craftsmanship Built with a modern, proven design and faultless construction, our centre lathes meet the highest safety standards—exceeding both CE and HSE requirements. All machines are CE & CA marked as standard. Inspir...
Year - 1980
spindle dia - 102(mm)
X - 1600(mm)
Y - 1250(mm)
Z - 1600 (mm)
Table length - 1120(mm) T
Table width - 1000(mm)
Taper - 50(ISO/MT)
Power - 25(kW)
TableBorer w.HDH Positioni...
