The Mega thread/profile forming machine is equipped with swivelable roller shafts. This ensures optimum capacity and use in making threads and axially parallel profiles in the through-feed process. However, short cylindrical parts (especially thread pins) can also be rolled in the through-feed process automatic feed of the work is necessary. This machine can also be used in the in-feed process with parallel die axes, the length of the profile to be rolled depends on the width of the rolling dies, there is no axial
Swivelable roller shafts at full utilisation of the rolling force
Short working cycles by increasing the forward return speed
Increase driving power, optional use in slow motion/normal and rapid advance by hydraulic multi-circuit system
Increase in the efficiency and improvement of the utilisation of power by gears on parallel axes and drive by universal shafts
Free passage between the roller shafts for the manufacture of any length of profiles.
SCHWER & KOPKA monitoring device
Feeder
Lot of toolings
Dies from M4 to M12
Injector plates
Diameter M4 to M12
Blank length 100 mm
Thread length 75 mm
PPM (vari-speed motor) 25 - 220
Motor power 20 HP
Machine weight 4 T
Machine dimensions...