The gripping pull-back action of our Pullback Collet Chuck (16C) to actuate the collet chuck. Means the workpiece will be moved slightly in the Z-Axis. This is normally acceptable for first operation work and the work piece position can easily be determined with a facing cut. The 5C and 16C collets have been designed with a long small nose diameter allowing for good clearance for tooling. All collet closers are case hardened and ground optimising the rigidity, strength and durability.
PRELIMINARY SPECIFICATIONSBLANCHARD ROTARY SURFACE GRINDERMODEL 32-60YEAR 1961STANDARD SPECIFICATIONSRANGE72" SWING30" VERTICAL RANGE OVER CHUCK WITH NEW WHEEL SEGMENTSKVA REQ'D75 HP - 95 KVAWORK TABLE60" DIA. MAGNETIC CHUCK (BLANCHARD ONE PIECE STEE...
Swing over bed 400mm.Swing over cross slide 246mm. Height of centres 195mm. Distance between centres 1270mm. Spindle nose D1 – 6 Camlock. Taper in spindle nose bush No 4 MT. Spindle bore 54mm. Spindle speeds 14 – 2500 rpm (Inf.var.) Maximum spi...
Werner Bayer GmbH model Bayer core plug insertion, leak test and identity marking system (to include all product specific work piece holders and tooling, etc.), Serial No. 748, YoM 2001
The Transwave static converter is ideal for a workshop enviroment where there is only one machine operated at any one time.
Input voltage 220/240v 50Hz
Output voltage 380/415v 50Hz
Single-phase require...
Industrial Drawer Unit28” Wide28” Depth40” High6 DrawersAll good condition For sale with Jet Machinery LtdJet Machinery Stock No: #78952Machine Serial Number: NACost: £500.00 + VAT Whilst every effort has been made to ensure that the above inf...
