Maximum swing over bed 2000mm. Swing over cross slide 1680mm. Distance between centres 5000 mm. No. of spindle speed (24) Spindle speeds (3 ranges) A range 0.8 – 4 rpm. B range 5 – 25 rpm. C range 31.5 – 160 rpm. Speed ranges A&B are pinion drive. Spindle bore 105mm. Spindle Torque (maximum) 63,000 NM. Width of bed 1500mm. Front bearing dia. 320mm. Feeds (Longitudinal) (20). Longitudinal feed range obtainable in A,B & C Speed range (1:1 ratio) 0.18mm – 5mm/revolution. Longitudinal feed range obtainable in A & B Speed range (8:1 ratio) 1.45mm – 40mm/revolution. Longitudinal feed range obtainable in A Speed range (32:1 ratio) 5.75mm – 160mm/revolution. Feeds (Cross)(20) (1.1 ratio) 0.09mm – 2.5mm/revolution (8:1 ratio) 0.72mm – 20mm/revolution. (32:1 ratio) 2.88mm – 80mm/revolution. Feeds (Compound slide) (20) (1.1 ratio) 0.09mm – 2.5mm/revolution (8:1 ratio) 0.72mm –20 mm/revolution. (32:1 ratio) 2.88mm – 80mm/revolution. Rapid Traverse – Longitudinal/Cross/Compound – 4000mm/2000mm/2000mm. English & Metric Screwcutting. Tailstock Quill dia.280mm. Quill travel 200mm. Quill rapid traverse 300mm/min. Tailstock rapid travel 1500mm/min. Tailstock transverse travel +/- 30mm Main motor 75 kW. Motor speed 1500 rpm. Rapid feed motor 3 kW. Rapid motor speed 1500 rpm. Tailstock traverse motor rating 1.1 kW. Quill travel motor rating 2.2kW. Lubrication motor rating 0.6 kW. Weight of workpiece: Free in chuck @ 350mm from centre of gravity 4000 kg. Between Centres (unsupported) 30,000 kg. Between Centres (1 x steady) 35,000 kg. (2 x steadies) 40,000 kg. Machine complete with 2000mm dia. 4 Jaw Independent Chuck with Chuck Jaws. Operator controls on carriage. English/Metric Threading. Powered compound slide. Powered Tailstock & Quill. 3 point fixed roller steady.3 point travelling steady. Newall DP700 Digital Readout. Hardened & Ground Gears & Spline Shafts. Heavy Duty Meehanite Casting. Machine Weight 36,200 kg
This 160 ton hydraulic press has an extra wide working width (1500 mm) for handling larger materials. Equipped with a movable cylinder (left-right), in-height adjustable working table, pressure regulation, 2 speeds, joystick and a hand pump for preci...
Steel Washers Pack
Zinc-plated for corrosion resistance. Includes flat and spring washers in assorted sizes M5 to M10. Handy storage case with compartments.
210 piece
...
SASS
08883
Max drilling diameter on steel mm 80
Max drilling diameter on cast iron mm 100
Min. and max arm mm 685-2500
Base-spindle nose min. and max mm 485-2085
Vertical quill mm 500
Diameter mm 550
Spindle taper MORSE 6
Spindle diameter mm 110
Spee...
GIANA
07388
LIVE TURRET AND C-AXIS
CNC ECS 2302
CAPACITY':
Height center mm 430
Distance between centers mm 4000
Swing diameter on the bed mm 720
Swing diameter on the cross slide mm 720
Max piece weight between centers Kg 6000
BED:
Monolithic, steel...
