Home > Miscellaneous > Other Machines Go Back
REQUEST PRICE VIEW MAP

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • ARKU
  • Model:
  • ARKU EDGEBREAKER 3000 2019,
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Work pieces can also have burrs removed on both sides with the EdgeBreakerr plus machine option. Complicated turning of the components is eliminated. With the Plus version different type of grinding blocks can be used. The processing capabilities are thus extended. Tools are replaced simply and quickly, with the intelligent ARKU click-system. The type of processing can be widely adapted. Accordingly, different combinations can be run, such as top and bottom rounding with rounding blocks above and below or top and bottom burr removal with grinding blocks above and below, or a combination of the two. Due to sparks that are released while processing work pieces, a spark trap is imperative. Material With dry dust collection: Steel, stainless steel copper and various alloys With wet dust collection Aluminum and titanium Surface condition: Non-oil-treated flat-rolled products Material thickness Rounding unit:from 0.8 to 80 mm (0.031" to 3.15") Grinding unit: from 2 to 80 mm (0.079" to 3.15") Passage width: 1,300 mm (51") Min. dimensions (L X W): 180 x 100 mm (7.1" x 3.9") Max. part weight: Max. 250 kg/m (167 lbs/ft) How parts are fed: Manually or by optional transport conveyor belts Pass height: 940 mm (37") +/- 30 mm (1.2"), adjustable Pass direction: From left to right Feed rate: 0.2 to 6 m/min (0.66 to 19 ft./min) Electrical parameters: 3 phase x 480 VAC / 60 Hz Power: 25 kW Power supply: 80 Amps Ambient temperature: 41F to 104F (5C to 40C) Relative air humidity: Less than 80 % Machine weight: About 5,250 kg (11,600 lbs) *see technical description under paragraph.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

fdbdgbdgb fxnjmynhtbgvfcd

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      Block Stop
      Description:
      Double ended stop to hold 2 components. Suitable for use with CP12 and CP38. Supplied either ground for second operation work or serrated for first operation.

      More Info

    • Manufacturer:
      MACH
      Model:
      CNC milling machine
      Description:
      {"Table length": "1200 mm", "Table width": "450 mm", "Longitudinal travel (X-axis)": "650 mm", "Transversal travel (y axis)": "480 mm", "Vertical travel (z axis)": "475 mm", "Spindle speeds:": "", "stepless": "", "vertical from": "0 mm/min", "up to":...

      More Info

    • Manufacturer:
      Toyoda
      Model:
      Toyoda LineamIII (12.178MM)
      Description:
      Taper: HSK-A63Cross Travel (mm): 630Vertical Travel (mm): 700Longitudinal Travel (mm): 630Table (mm): 450 x 450 cmMax. Load: 400 kgkW: 30

      More Info

    • Manufacturer:
      TRUMPF
      Model:
      230 TON X 10' TRUMPF TRUBEND 5230,6-AXIS,HYDRAULIC CLAMPING,MFG:2014
      Description:
      BENDING LENGTH 10' TONNAGE 253 TON STROKE 17.5" BEAM ENTRY 24.2" DISTANCE BETWEEN SIDE FRAMES 105.9" THROAT DEPTH 16.5" Y-RAPID SPEED 8.66"/SEC. Y-OPERATING SPEED 0.39"/SEC APPROX. WEIGHT 36,155 LBS. Equipped With TRUMPF TASC 6000 CONTROL 6-AXIS BACK...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User