REQUEST PRICE VIEW MAP

MACHINE INFORMATION AND SPECIFICATION

Category:
Miscellaneous

Subcategory:
Other Machines

Manufacturer:
OTEC

Model:
Amada PROTECTOR M42 bandsaw blade

Condition:
1

YOM:
NA

Control:
NA

Price:
POA

Seller:
Accurate Cutting Services Ltd

Country:

DESCRIPTION

Amada PROTECTOR bandsaw blade exclusively for structural steel, rolled sections metal cutting Exclusively for the structural steel, strong against tooth chipping and capable of providing unparalleled high efficiency. PROTECTOR added to the back face of the tooth tip prevents excessive cutting. Suitable for: Construction Steel, Aluminium Alloys, Copper Alloys M42 High-Speed Steel Edge Unique Design Tooth Form PROTECTOR added on the back face of the tooth tip suppresses excessive cutting and prevents continuous chipping from occurring. Wide Set Available Positive Rake Tooth Angle Strong Tooth Profile As the tooth tip is made stronger, it endures impacts caused during intermittent cutting. At the same time, high cutting efficiency is assured. Set Design The broaching style set pattern was designed to eliminate pinching, therefore preventing the blade from binding in the cut. Wide Set Available When a roll-formed large-size H-beam is cut, stress relieving may occur, pinching the blade. In order to prevent damage to the blade, a “WS” (Wide Set) type is available for PROTECTOR. ADVANTAGES Extra Tough Shock Resistance Extra Tough Tooth Strippage Resistance BENEFITS Extra Fast Cutting on Structural Steel Extra Long Life in Interrupted Structural Cutting Low Cost Per Cut The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products. * The WS (Wide set) type blade is a special saw blade with a measure against pinching which occurs easily when cutting the roll formed large size H-beam (applicable to H-beam whose width is over 400mm and mainly intended for that of 600mm or more width). The “PROTECTOR” WS type blade is a special saw blade with an intensified measure against pinching than the conventional WS type blade. Using of the WS type blade for cutting the material where no pinching would occur may shorten the service life of the blade. Specifications may change without notice at the sole discretion of Amada’s Engineering Department.

+ request more information

SEND ENQUIRY

*I AM A

Dealer

End User

Check here if you no longer wish to subscribe to our newsletter.

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A

Dealer

End User

Check here if you no longer wish to subscribe to our newsletter.

Sellers

Accurate Cutting Services Ltd

Contact Name
Mark Fleeming

You may also be interested in these Machines

Manufacturer:

Roundo

Model:

Roundo - PAS-460 x 4.200 mm (W239)

Description:

{"Brand": "Roundo", "Machine no": "W239", "Type": "PAS-460 x 4.200 mm", "Year of make": "1978", "Machine dimensions (L\u00d7W\u00d7H)": "3.000 x 7.400 x 2.500 mm", "Machine weight": "35.000 kg", "Hydraulic": "", "Roll length": "4.200 mm", "Plate thic...

More Info
Manufacturer:

Model:

Cylindrical Reduction Bush

Description:

These reduction bushes allow for the fitting of boring bars and drills with a straight shaft. All sizes are manufactured in a range of capacities. The sleeves are hardened and ground for a good fit for both the holder and the shaft.

More Info
Manufacturer:

Ursviken

Model:

Ursviken VP 400

Description:

{"Stock number": "170356", "Serial number": "616", "Capacity": "400 ton", "Stroke": "500 mm", "Table": "2550x750 mm", "Slide": "600x1300mm", "Rapidtraverse & returnspeed": "90 mm/s", "Speed": "9 mm/s", "Pump engine": "40 hp", "Manufacturing year": "1...

More Info
Manufacturer:

Bystronic

Model:

4000 WATT BYSTRONIC BYSMART FIBER 3015 LASER W/BYTRANS3015 LOAD/UNLOAD,MFG:2018

Description:

Construction length, ca. [L]: 430" Construction width, ca. [W]: 245" Construction height, ca. [H: 125" Nominal sheet size (X): 120" Nominal sheet size (Y): 60" Cutting area (X): 124" Cutting area (Y): 63" Cutting area (Z): 2.5" Maximum positioning sp...

More Info