The Darex V391 Drill Sharpener is Priced right for small shops - even very small shops can economically sharpen their own drills in real time.
it incorporates much of the same technology in the more advanced machines
It is the perfect choice for shops that need a sharpener for intermittent use.
It's simple, intuitive design gives everyone access to sharp drills when you need them.
The Darex V391 Drill Sharpener comes standard with a CBN grinding wheel for HSS drills and an additional diamond wheel is available for carbide drills.
and is adjustable for point angle, relief angle, point split angle and depth as well as stock removal
and no tools are required for any adjustments on the machine.
there is an optional vacuum accessory which attaches to the vacuum port. If vacuum is not used, the V391 features a grit tray for dust collection.
Duty Rating: Light duty, intermittent use
Grit Removal System: Optional vacuum
Cutting Tool Diameter: 3–19 mm
Options Available: Morse Taper chuck
Operation Mode: Manual
Machine Weight: 11 kg
Point Angles Sharpened: 118°–140°
Machine Size: 30 x 28 x 23 cm
Point Styles Sharpened: Standard conic and split point
Sharpening Wheel Included: Borazon (CBN) for HSS & cobalt (diamond option for carbide available)Remove reference to diamond wheel
Power: 3 amps at 230V; 3450 rpm.
SPECIFICATIONS:
SWING OVER BED WAYS ................... 53-1/8"
SWING OVER CROSS SLIDE ................ 41-3/8"
SWING IN GAP .......................... 65"
DISTANCE BETWEEN CENTERS .............. 120"
WIDTH OF BED .......................... 26"
SPIND...
High Speed on axis rapid feed and tool changeover High performance by built-in motor-spindle 1000rpm (30kW) (40HP) High efficiency by rotary style APC and oversized linear guideways Dual screw chip removers
Table Data:
Capacity | S2500U
Table area | 1300x300mm
Number of “T” shaped slots | 3-16H7
Distance between “T” shaped slots | 70mm
Rotary movement of table in both direction | 45º
Automatic longitudinal | 950mm
Automatic cross | 380mm
Auto...