Work pieces can also have burrs removed on both
sides with the EdgeBreakerr plus machine option.
Complicated turning of the components is eliminated.
With the Plus version different type of grinding blocks
can be used. The processing capabilities are thus
extended.
Tools are replaced simply and quickly, with the
intelligent ARKU click-system. The type of processing
can be widely adapted. Accordingly, different
combinations can be run, such as top and bottom
rounding with rounding blocks above and below or top
and bottom burr removal with grinding blocks above
and below, or a combination of the two.
Due to sparks that are released while processing
work pieces, a spark trap is imperative.
Material
With dry dust collection: Steel, stainless steel copper and various alloys
With wet dust collection Aluminum and titanium
Surface condition: Non-oil-treated flat-rolled
products
Material thickness
Rounding unit:from 0.8 to 80 mm (0.031" to 3.15")
Grinding unit: from 2 to 80 mm (0.079" to 3.15")
Passage width: 1,300 mm (51")
Min. dimensions (L X W): 180 x 100 mm (7.1" x 3.9")
Max. part weight: Max. 250 kg/m (167 lbs/ft)
How parts are fed: Manually or by optional
transport conveyor belts
Pass height: 940 mm (37") +/- 30 mm (1.2"), adjustable
Pass direction: From left to right
Feed rate: 0.2 to 6 m/min (0.66 to 19 ft./min)
Electrical parameters: 3 phase x 480 VAC / 60 Hz
Power: 25 kW
Power supply: 80 Amps
Ambient temperature: 41F to 104F (5C to 40C)
Relative air humidity: Less than 80 %
Machine weight: About 5,250 kg (11,600 lbs)
*see technical description under paragraph.
DPM version with automatic clamps positioned by head | MMI version with automatic motorised vices | Full CAM-3d software | Integration with external software | Optional angle drive unit to machine profile sides | 7430mm working length | Open ends to ...
The Kitagawa BR series is a large bore three jaw chuck, when coupled with T-nuts Plus a T.I.R of 0.01mm or less can be maintained to reduce setup times. The BR series are supplied with a blank drawnut, Set of Soft Jaws and a set of standard T-nuts as...
Serrated Ball End Bolt PT51 is designed with a focus on durability and precision, featuring an S45C bolt and SUJ2 ball,
both undergoing heat treatment to ensure optimal hardness. Its surface is finished with black oxide to enhance corrosion resist...